Napoleon Fireplaces EPA1400L, EPI 1402, EPA1900, EPA1150, EPA1100L, EPA1100C Blower Installation

Page 9

3.The access panel can be removed by taking out the 8 #10 self taping screws. A 5/16" nut driver will be required to complete this job. Unplug wires from the thermal switch on the panel. See FIGURE 15.

4.Remove the securing wingnut from the blower mounting bracket, slide the bracket to the right and rotate the left side of the assembly out of the cavity to clear the blower motor. Disconnect the two wires from the blower motor. Remove the ground wire from the blower mounting bracket, then the assembly can be taken out of the rear cavity through the access door opening.

5.Remove the 3 screws that hold the blower to the mount- ing bracket. Service or replace the blower as required.

GROUND STUD SECURING

WINGNUT TAB

9

1150 BLOWER INSTALLATION

1.Remove the knock-out from the back of the fireplace.

2.Install the blower and housing as shown using the 4 screws supplied.

FIGURE 19

FIGURE 16

6.Reinstall the blower assem- bly making sure the blower bracket is seated under the se- curing tab. FIGURE 16. Reattach the wire connectors. FIGURE 17.

7.Replace the gasket on the ac- cess door. To replace the ac- cess panel, reverse Step 3 .

8.Replace the bricks into the firebox. Reinstall the door.

WIRES

FIGURE 17

3.Loosen the thermodisc bracket (2 screws) and slide the bracket forward until the thermodisc is touching the rear firebox and secure.

1150 FEATURES

FIGURE 20

1401 BLOWER SERVICE OR REPLACEMENT

1.Turn off all electrical power to the insert. Remove the glass door and set aside in a safe place.

2.Remove the two screws from the outer edge of the side panel(s).

3.Push the side panel toward the door and pull away from the insert, releasing the panel from the keyed slot.

4.Service or replace the blower(s) as required.

5.Re-install the side panel(s) by reversing the procedure.

G

HEATB

SENSOR

W

FIGURE 18

Pot

Fender

Wood

Storage

(intended for

short term use)

LID LIFTER

HOOK

Remove the screw, as illustrated, from the preferred side of the stove rear. Secure the lid lifter hook, as illustrated, facing out to the side, or bend it towards the back.

W415-0512 /C 10.02.06

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Free Standing Models Insert Models Table of Contents Conditions and Limitations Napoleon Wood Fireplace Presidents Lifetime Limited WarrantyGeneral Information Care of GlassPedestal Models only Installing the Legs Stove InstallationStove Installation Alcove InstallationPedestal Models Outside AIR Mobile HomeAdding Chimney Sections Wall PASS-THROUGHPrior to Installation Hint for Installing Porcelain Enamel InsertsInstallation Into a Masonry Fireplace Fireplace InsertOptional Blower Installation Into a Factory Built FireplaceStove Models LEG Models onlyBlower Installation Finishing Operation Fire Extinguishers / Smoke Detectors Achieving Proper DraftFuel Loading and Burn Cycle Flash FireMaintenance Door Removal 1100C only Wood Pile MaintenanceDOS DontsReplacement Parts ReplacementsBlower KIT Accessories31A Fireplace Service History W415-0512 /C W415-0512 / C

EPI 1402, EPA1150, EPA1100C, EPA1400, EPA1900 specifications

Napoleon Fireplaces is renowned for its dedication to quality, craftsmanship, and innovative technology in the heating industry. Among its acclaimed lineup, the EPA1400, EPA1100C, EPA1400L, EPA1100, and EPI 1402 models stand out for their superior performance and eco-friendly design.

The EPA1400 is celebrated for its compact size and powerful heating capabilities. This model features advanced Air Wash technology, which keeps the glass clean for unobstructed views of the fire. With a robust firebox, the EPA1400 can accommodate logs up to 18 inches, providing prolonged burn times. The user-friendly design includes an adjustable air control system that optimizes combustion airflow, enhancing efficiency while reducing smoke emissions.

The EPA1100C is another remarkable offering from Napoleon, designed for those seeking an efficient and environmentally conscious heating solution. This model focuses on achieving higher efficiency ratings with its innovative secondary combustion system. The EPA1100C also emphasizes user convenience, featuring easy-to-use controls and a large viewing area to enjoy the flames.

Expanding on the versatility of its product line, the EPA1400L is designed with a longer firebox, making it ideal for longer logs while maintaining optimal heat output. This model maximizes combustion efficiency through its advanced baffle design, which promotes better airflow and even heat distribution. The EPA1400L is particularly well-suited for larger spaces, delivering warmth with minimal environmental impact.

The EPA1100 model stands as a testament to Napoleon's commitment to providing powerful yet efficient heating solutions. This unit combines innovative technology with practical features, including a large firebox and an exterior ash clean-out system that simplifies maintenance.

Lastly, the EPI 1402 epitomizes modern heating technology. This unit is optimized for energy efficiency and reduced emissions without sacrificing style or comfort. The EPI 1402 comes equipped with Napoleon’s patented Ember Bed Lighting, creating a cozy ambiance even when the fire isn’t lit. Its robust thermal mass ensures that heat is radiated steadily over time, making it an excellent choice for any home.

Together, these models represent the fusion of technology and aesthetic elegance, providing homeowners with reliable heating solutions that are both effective and environmentally friendly. Napoleon Fireplaces continues to set the standard in the fireplace industry with its commitment to innovation and customer satisfaction.
Top Page Image Contents