Dutchwest
Specifications
D
G
F
E 
C
A
B
Stove Model Number | 2460 | 2461 | 2462 |
A | 22” (560 mm) | 25³⁄₄” (654 mm) | 28¹⁄₄” (717 mm) |
B | 21” (530 mm) | 24¹⁄₂” (620 mm) | 27” (690 mm) |
C | 29³⁄₄” (754 mm) | 30” (760 mm) | 33” (840 mm) |
D | 16” (410 mm) | 16” (410 mm) | 18¹⁄₄” (467 mm) |
E | 14³⁄₄” (375 mm) | 14⁵⁄₈” (380 mm) | 17” (430 mm) |
F | 26³⁄₄” (683 mm) | 27” (690 mm) | 30¹⁄₈” (763 mm) |
G | 29³⁄₄” (754 mm) | 30” (760 mm) | 33” (840 mm) |
Log length: | 19” (480 mm) | 22” (560 mm) | 25” (640 mm) |
Maximum burn time1: | 8 hrs. | 9 hrs. | 12 hrs. |
Average area heated (sq. ft.)2: | |||
Range of heat output4: | 7,800 - 26,800 Btu/hr. | 11,300 - 26,800 Btu/hr. | |
Maximum heat output: | 35,000 Btu/hr. | 40,000 Btu/hr. | 55,000 Btu/hr. |
EPA emissions rating4 (g/h, catalytic): | 1.1 | 1.4 | 1.3 |
Weight: | 380 lbs. (172 kg) | 436 lbs. (198 kg) | 634 lbs. (288 kg) |
Loading: | Side or front | Side or front | Side or front |
Flue exit position (reversible): | Top or rear | Top or rear | Top or rear |
Air controls: | 2 controls | 2 controls | 2 controls |
Fig. 1 Dutchwest Convection Heater specifications.
1.Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods, and may vary in individual use depending on how the stove is operated, type and moisture content of fuels, and other factors. Maximum burn times are achieved under different operating conditions than are maximum heat outputs.
2.These values are based on operation in building
4.Under specific conditions used during EPA emissions testing.
5.Based on preliminary results obtained during EPA emissions testing.
7001135 | 3 |