Vermont Casting CSA 2.14-2000, ANSI Z83.7-2000 Troubleshooting, Shutdown Instructions

Page 8

SHUTDOWN INSTRUCTIONS:

Shutoff Heater:

WARNING: Motor and fan must be running before lighting, during operation and at shutdown, in order to prevent a flame-out condition which could result in personal injury or property damage. Turn gas valve knob clockwise to OFF position.

Turn gas supply OFF by turning Propane tank valve clockwise to close. Disconnect the power cord once the heater has cooled to ambient temperature.

TEST FIRING HEATER:

Test fire your construction heater, following the lighting instructions applicable to the gas control system employed. Leak test all gas connections with soap solution. Soap bubbles indicate gas leak- age. DO NOT use a match or flame to test for gas leaks.

STORAGE: Never store a Propane gas tank inside a building or in the vicinity of any gas or oil burning appliance. When the Propane tank is not disconnected from the construction heater, the gas tank and heater must be stored outdoors in a well ventilated area, out of the reach of children. If for any reason the heater is to be stored indoors, the tank must be disconnected and stored outdoors in a well ventilated area out of reach of children, in accordance with the standard for the the Storage and Handling of Liquefied Petroleum Gases, ANSI / NFPA 58 and CSA B149.1, Natural Gas and Propane Installation Code. The plastic tank valve plug supplied with your tank must be tightly installed when the tank is disconnected from the heater.

MAINTENANCE INSTRUCTIONS:

1.Turn unit off, allow heater to fully cool and disconnect propane hose before performing any Maintenance functions.

2.Keep unit clean and keep the inside of the torpedo housing debris free.

3.Have unit checked by a qualified technician at least once a year, preferably prior to the heating season.

TROUBLESHOOTING:

PROBLEM

POSSIBLE CAUSE

CORRECTIVE ACTION

Fan does not turn when

1. No electric power to heater.

1.

Check current to electric outlet. If voltage

electrical connection is

 

 

 

is correct, check power cord and exten-

made.

 

 

 

sion cord for cuts and extension cord for

 

 

 

 

cuts and breaks.

 

2. Fan blade contacts inside of heater housing.

2.

Be sure that housing is not damaged.

 

 

 

 

Make sure there are no obstructions to

 

 

 

 

the fan.

 

3.

Fan blade(s) bent

3.

Straighten blade(s) to match others.

 

4.

Fan motor defective.

4.

Replace motor.

 

 

 

 

Heater will not fire.

1. No spark at ignitor.

1.

Check ignitor wire. Re-attach or tighten

 

 

 

 

if loose. Check Spark module. Replace if

 

 

 

 

necessary.

 

2.

Improper spark gap.

2.

Set gap to 0.16”

 

3.

Bad electrode.

3.

Replace Spark Plug.

 

 

 

 

Heater quits while

1. Internal temperature too high causing limit

1.

If the heaters output is restricted, internal

running.

 

switch to shut down operation.

 

temperature becomes too high. Move

 

 

 

 

heater away from any obstructions.

 

2.

Damaged Control Valve.

2.

Replace Control Valve.

 

3.

Dust or debris build-up inside of heater.

3.Clean inside of heater.

 

 

 

 

 

Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular usage, and check spark gap at least once per season.

Page 7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Propane Construction Heater Table of Contents Dyna-Glo Propane Forced Air Construction Heaters Product Features General Safety InstructionsImportant Safety Information Unpacking Installation to the Propane GAS Tank Refilling the Propane GAS TankLeak Checking Troubleshooting Shutdown InstructionsPropane Construction Heater Illustrated Illustrated Parts Breakdown RMC-FA40A/RMC-FA50A100,000 BTU/Hr 150,000 BTU/Hr NUT HOT04Y Motor Assembly Wiring Diagrams Warranty

ANSI Z83.7-2000, CSA 2.14-2000 specifications

Vermont Castings CSA 2.14-2000 and ANSI Z83.7-2000 are key standards in the world of gas appliances, particularly for those using charcoal, propane, or natural gas. These standards provide guidelines aimed at ensuring safety, efficiency, and performance in a variety of heating equipment, including fireplaces, stoves, and other appliances.

The Vermont Castings CSA 2.14-2000 standard pertains to the performance and construction criteria for residential gas appliances. A significant feature of this standard is its emphasis on safety mechanisms designed to prevent gas leaks and ensure reliable ignition. This ensures that users are protected from the risks associated with gas-based heating. The standard also outlines the requirements for proper ventilation, which is crucial for any gas appliance to operate effectively without the risk of harmful emissions.

Another notable aspect of the CSA 2.14-2000 standard is its focus on efficiency. It mandates strict guidelines for energy use, which encourages manufacturers to innovate and create appliances that not only meet consumer heating needs but also do so in an environmentally friendly manner. Appliances compliant with this standard are likely to embody technologies that optimize fuel utilization and reduce emissions, contributing to a more sustainable heating option for consumers.

ANSI Z83.7-2000 complements the CSA 2.14-2000 standard by addressing the safety and construction requirements specific to gas-fired appliances. This standard sets forth comprehensive design criteria that prevent the occurrence of hazardous situations such as accidental fires or carbon monoxide poisoning. It emphasizes the importance of utilizing high-quality materials in appliance construction, ensuring durability and safety over an extended life cycle.

One of the key technologies addressed in these standards is ignition systems. Advanced ignition mechanisms, such as electronic spark ignitions and pilot light systems, are covered to ensure reliable and secure operations. The standards also stress the importance of user-friendly features, ensuring that consumers can operate the appliances with ease while adhering to best safety practices.

In conclusion, Vermont Castings CSA 2.14-2000 and ANSI Z83.7-2000 set industry standards that prioritize safety, efficiency, and user experience in gas-fired appliances. By ensuring compliance with these guidelines, manufacturers are encouraged to pursue innovations that enhance the performance and environmental responsibility of their products, thereby benefiting consumers and the planet alike.
Top Page Image Contents