Vermont Casting C34G624M owner manual Troubleshooting tips, Problem Possible Remedies

Page 19

Vermont®

Troubleshooting tips

Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance.

PROBLEM

POSSIBLE REMEDIES

Fan will not start

Check the main circuit fuses, circuit breakers, and wall switch position. Check all wire

 

 

connections. Make sure the power is turned off during this inspection.

 

• The 9-pin connector is not making good contact. Check the 9-pin connector in the receiver

 

 

mounted in the switch housing.

 

• The battery is weak. Install a fresh battery.

 

• The fan receiver is defective. Replace fan receiver.

 

Check the frequency setting: Turn the power off at the circuit breaker, only for the fan

 

 

that is not functioning. Check that the jumper switches match in both the receiver and the

 

 

transmitter.

Fan wobbles or shakes excessively

Be sure the canopy pin is set properly into the slot on the ball.

 

Check that the bladeholders have not been bent during installation and the blades are

 

 

balanced.

 

• The hanger bracket and/or ceiling outlet are attached too loosely. Make sure the hanger

 

 

bracket is attached tightly to the ceiling outlet box and the downrod assembly is secured

 

 

firmly.

 

• The downrod is attached to downrod base too loosely. Make sure all the screws are securely

 

 

tightened.

Fan is noisy during operation

Check and tighten the light fixture retaining screws, glass shade screws, and/or

 

 

lightbulb(s).

 

• Tighten the canopy screws and mounting plate assembly. Make sure the wire nuts inside

 

 

the canopy and switch housing are not touching the metal parts and that they have not

 

 

fallen off the wire splices. Tighten as necessary.

 

Tighten the blade holders to the flywheel (or direct drive motor) and the blades to the

 

 

bladeholder screws.

 

• Make sure all screws in the motor housing are snug but not overly tight.

Fan does not run on low speed

If fan is new, it may need to be “broken in.” Run at high speed for several days.

Battery life is short

Replace with alkaline batteries.

Light works, but fan does not work

The fan wires are not connected properly.

Fan and light run only on full speed

The fan receiver is defective. Replace fan receiver.

Fan is missing one speed

The fan receiver is defective. Replace fan receiver.

Fan does not change speed, but light works

The fan receiver is defective. Replace fan receiver.

Reverse does not work

The fan receiver is defective. Replace fan receiver.

Fan starts working by itself

There is frequency interference.

Fan operates only when transmitter is close

Check that antenna wire is not touching metal plate.

Fan works, but light does not dim

The fan receiver is defective. Replace fan receiver.

Fan works, but light does not work

The fan receiver is defective. Replace fan receiver.

 

• The light socket is broken. Replace socket.

 

• A lightbulb is defective. Replace lightbulb.

 

 

 

 

 

In compliance with US Federal Energy Regulations, this

 

 

 

ceiling fan contains a device that restricts the light kit to a

 

 

 

maximum of 190 watts. Exceeding that limit or the marked

 

 

 

limit on this product may result in a fire hazard or improper

 

 

 

operation.

 

 

 

 

 

19

Image 19
Contents Vermont Read and save these instructions ContentsVermont Proper Parts HandlingParts Guide Page Unpacking Introduction Before You StartGeneral Guidelines Mounting RecommendationsGetting Started Ceiling bracket Bracket Installation Ceiling bracket Preparation and InstallationFigure #1 Motor InstallationFigure #3 Motor Housing Installation Figure #6 Blade Preparation and Installation Light Fixture Installation Install Halogen Bulb Glass InstallationVermont Control Bracket Installation VERSATOUCH2 Control InstallationRemote Operation Battery InstallationChanging Transmitter Frequency Setting Problem Possible Remedies Troubleshooting tipsCare Recommendations Product Specifications

C34G624M specifications

The Vermont Castings C34G624M is a premier wood-burning stove that exemplifies both functionality and aesthetic appeal. Designed for homeowners who prioritize efficiency and warmth, this model is known for its robust construction and advanced features that enhance the overall heating experience.

One of the standout characteristics of the C34G624M is its impressive heat output. With a BTU rating that can reach up to 75,000, this stove is capable of warming large spaces, making it an ideal choice for those with expansive living areas. The efficient use of fuel ensures that longer burn times can be achieved, translating to fewer reloads throughout the day.

The stove features Vermont Castings' renowned cast iron construction, which not only provides durability but also retains heat longer than traditional steel models. This means that even after the fire has died down, the stove continues to radiate warmth, creating a comfortable indoor environment.

Incorporating Advanced Airwash Technology, the C34G624M minimizes creosote buildup and leads to cleaner glass for an unobstructed view of the fire. This innovation promotes safer operation and a more enjoyable visual experience. Additionally, the stove's secondary combustion system maximizes heat output while minimizing emissions, adhering to strict EPA standards.

The C34G624M is designed with user convenience in mind. Its simple airflow control system allows for easy adjustments to the burn rate, giving users the ability to customize their heating experience according to their needs. This model comes equipped with an easy-to-use ash pan, facilitating clean-up and maintenance.

Another significant feature is the design flexibility. The stove is available in multiple finishes, allowing homeowners to match it seamlessly with their existing décor. Its classic design coupled with modern technology creates a timeless piece that serves not just as a heating source but also as a striking centerpiece in any room.

With Vermont Castings’ reputation for quality craftsmanship and attention to detail, the C34G624M model stands out as a reliable heating solution that combines classic aesthetics with cutting-edge technology. Whether used for cozy family gatherings or quiet evenings by the fire, this wood-burning stove ensures warmth, efficiency, and beauty for years to come.