Sunbeam 2570 owner manual Maintenance, Cabinet, Replacing the High Efficiency Cartridge HEC

Page 3

MAINTENANCE

Cabinet

The outside of the cabinet can be cleaned by using a soft, clean, damp cloth. Never immerse the unit in water.

Replacing the High Efficiency Cartridge (HEC)

The High Efficiency Cartridge will need to be replaced every 3-4 months under normal operating conditions.

Turn off the air cleaner and unplug it from the electri- cal power source.

Remove cabinet lid by depressing tab located under lid overhang (see Figure 9 for exact tab placement). Slide lid forward from base and lift off. (Figure 4)

Figure 4

To replace the High Efficiency Cartridge, push the lock- ing latch (Figure 5) away from the filter, lift used filter out and insert new filter. The used filter can now be discarded.

HIGH EFFICIENCY

C A R T R I D G E

L O C K I N G L A T C H

Figure 5

Replace the cabinet top by positioning over the unit. (Figure 6) Gently slide the top forward until the top drops into place. (Figure 7) Slide the top backward until flush with the back of the unit. (Figure 8)

Figure 6

Figure 7

Figure 6

To Clean the Negative Ion Generator Needle

The Negative Ion Generator needle is located in the right rear of the air cleaner (Figure 9) and should be cleaned every 60 days.

Turn off the air cleaner and unplug it from the electric power source. Wait approximately 1 minute before removing top and cleaning.

Carefully use a cotton swab dipped in alcohol and wipe off the dirt from the needle. Using a dry cotton swab, make sure the needle is dry.

Replace the cabinet top by following the steps listed above. (Figures 6, 7 and 8)

NEGATIVE

IIonNOION GENERATOR

Figure 9

Image 3
Contents Model About Negative Ions HOW the Sunbeam 560 AIR Cleaner WorksIntroduction LocationReplacing the High Efficiency Cartridge HEC MaintenanceTo Clean the Negative Ion Generator Needle CabinetTroubleshooting Checklist To Order Replacement PartsKey Number Part Description Replacement PartsLimited ONE Year Warranty Statement