Basic Disc Play, LCD Display Information

CLEANING DISCS

•Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.

•Never use thinner, benzine, record cleaner or anti-static spray on a compact disc. Such chemicals can damage its plastic surface.

BASIC DISC PLAY

This CD-player can play Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1.Connect the headphones to the PHONES (GREEN) socket.

2.Press the OPEN button to open the CD compartment lid.

3.Adjust the VOLUME to minimum.

4.Insert the disc with the label side facing up.

5.Close the lid securely until a click is heard.

6.Press the PLAY button to start playing.

To Emphasize the bass sound	BASS BOOST
Set the BASS BOOST switch to the ON position.	ON OFF
Note: The bass boost performance will be dependant on the
VOLUME control setting.

LCD DISPLAY INFORMATION

WHEN POWER ON

•If disc is in, starts auto adjustment. During adjustment, display shows - -.

•If no disc, then disc is displayed.

Put the disc and close the lid, then starts auto adjustment again.

•If the lid is opened, display shows OPEN. Closing the lid starts auto adjustment.

•If can't read TOC thenEr is displayed. Note: TOC means Table Of Contents.

•When TOC data has been read, display shows TOC 1 second.

•Starts play from track No. 1 automatically. ANTI-SHOCKstarts flashing.

TO PLAY FROM STOP CONDITION

HOLD Switch

This switch prevents accidental selection of an unwanted function during Playback or Stop mode. In the HOLD "ON" position, no function button on the unit can operated (except OPEN). Moving the switch to the "OFF" position, the unit returns to normal operation.

HOLD

OFF ON

•Press PLAY/PAUSE button,

then display changes to 01 00:00 and starts play.

•When the memory full condition, ANTI-SHOCKstops flashing.

TO STOP

Turning Power on and off

This unit has no ON/OFF switch. To turn on and off, press the following buttons. To turn on: Press >II PLAY/PAUSE (playback starts).

To turn off: Press ■ STOP button once to standby mode.

If press ■ STOP button twice, it will be turn off the power immediately.

Auto power-off function

When the unit is stopped (standby mode) for approximately 30 seconds, the power is automatically turned off.

Press STOP key, then stops play and TOC is displayed.

TO PAUSE

Press PLAY/PAUSE button, then pause on/off alternately. On pause condition, time display is flashing.