OWNER’S MANUAL
INSPECTING
BURNER
Check pilot flame pattern and burner flame pattern often.
PILOT FLAME PATTERN
Figure 30 shows a correct pilot flame pattern. Figure 31 shows an incorrect pilot flame pattern. The incorrect pilot flame is not touch- ing the thermocouple. This will cause the thermocouple to cool. When the thermo- couple cools, the fireplace will shut down.
If pilot flame pattern is incorrect, as shown in Figure 31
•turn fireplace off (seeTo Turn Off Gas to Appliance, page 18)
•seeTroubleshooting, pages 20 through 22
Thermocouple
Pilot Burner
BURNER FLAME PATTERN
Figure 32 shows a correct burner flame pattern. Figure 33 shows an incorrect burner flame pattern. The incorrect burner flame pattern shows the flame consistently higher than one inch above the log.
If burner flame pattern is incorrect, as shown in Figure 33
•turn fireplace off (seeTo Turn Off Gas to Appliance, page 18)
•seeTroubleshooting, pages 20 through 22
Top of Flame About
One Inch Below Logs
Figure 32 - Correct Burner Flame Pattern
Top of Flame Consistently About One Inch Higher Than Logs
Figure 30 - Correct Pilot Flame Pattern
Thermocouple
Figure 33 - Incorrect Burner Flame Pattern
Pilot Burner
Figure 31 - Incorrect Pilot Flame Pattern
104408 | 19 |