Cleaning and Maintenance

Always disconnect the unit from the electrical outlet prior to cleaning or servicing the unit!

Note that the servicing intervals mentioned in this section are based on air purifier use of 12 hours per day in a normal household environment. If your use of the air purifier differs from that described above, then you can adjust the servicing intervals accordingly.

1.Clean the outside of the LAP-1 and the area around the air purifier with a soft damp cloth once every month.

2.Access to the LAP-1 filters and serviceable components is by removing the rear cover.

To remove the rear cover, push the button above the rear cover while pulling back on the rear cover. The rear cover will pivot away from the main unit and then it can be lifted up and away. The rear cover is reinstalled by fitting the projection at the bottom of the rear cover into the slot at the back of the main unit and then closing the top of the rear cover until it snaps into place.

3.The Pre-Filter is removed from the rear cover, by sliding it out the upper edge of the rear cover. The Pre-Filter is reinstalled by sliding it back in the slot from where it was removed.

The Pre-Filter should be washed in warm soapy water or with a water spray once a month. Make sure that the Pre-Filter is completely dry before reinstalling it.

4.The Granulated Active Carbon Filter is visible looking at the open back side of the main unit. Remove the Carbon Filter by pulling on the ribbon attached to its top edge.

The Carbon Filter will thus detach the Velcro strips that hold it to the Filter Cassette. Granulated Active carbon Filter should be replaced once a year.

If the Granulated Active Carbon Filter is dusty, it can be cleaned gently with a vacuum cleaner.

LAP-1 specifications

Amcor LAP-1 is an innovative packaging solution that has gained attention for its versatility and advanced features. As a leading product in Amcor's extensive portfolio, LAP-1 is designed to meet the evolving needs of various industries, including food, beverage, pharmaceutical, and personal care.

One of the standout features of Amcor LAP-1 is its commitment to sustainability. The packaging uses materials that are designed to be recyclable and minimize environmental impact. Amcor has implemented a circular economy approach, ensuring that the packaging can be reused or repurposed once it reaches the end of its lifecycle. This focus on sustainability not only appeals to environmentally-conscious consumers but also helps brands comply with increasingly stringent regulations regarding packaging waste.

The LAP-1 technology incorporates advanced barrier properties, ensuring that products remain fresh and protected from external factors such as moisture, oxygen, and light. This is particularly critical in the food and beverage sector where preservation of flavor and quality is paramount. The multi-layer structure of LAP-1 provides superior protection while maintaining clarity, allowing consumers to see the contents without compromising on safety.

Another characteristic of the Amcor LAP-1 is its user-friendly design. The packaging can be easily opened and resealed, providing convenience for consumers while extending product shelf-life. This reusability is especially beneficial for products that are consumed over a period of time, as it helps reduce waste.

Amcor has also integrated cutting-edge printing technology into the LAP-1 packaging. This allows for high-quality graphics and branding opportunities that can enhance shelf appeal. Brands can leverage this feature to create eye-catching designs and communicate important product information effectively.

Additionally, LAP-1 incorporates smart packaging technology, offering options for QR codes and other digital integrations that enhance the consumer experience. Brands can provide additional information about product origins, nutritional information, and usage tips through these digital channels, connecting with consumers in a more engaging manner.

In summary, Amcor LAP-1 stands out as a state-of-the-art packaging solution that balances sustainability, functionality, and consumer appeal. With its focus on advanced barrier protection, user-friendly design, and innovative technology, LAP-1 caters to the demands of modern consumers and brands alike, making it a valuable asset in an increasingly competitive market.