Nuts on screw visible from front of unit
XDA mounting bracket ...
... attached to XDA
2.2.1Required Tools
•Phillips screwdriver
•Pliers
•Scissors
2.3Mounting the XDA on the Exterior of the Rear Cabinet Door
2.3.1Prepare to Install the Unit
1. Determine the desired mount- ing position on the door.
2. Attach the mounting bracket to the top of the XDA, positioning the bracket to obtain the desired mounting height.
3. Position the hanging support of the bracket toward the rear of the unit, with the tabs of the
bracket down and in front of the mounting angles.
4.From the rear of the unit, place screws through the XDA mounting angles, then through the bracket.
5.Place nuts on the screws and tighten them. The nuts should be visible from the front of the unit.
XDA with mounting bracket being hung on door
Lifting mounting bracket off XDA
3