Listen Technologies LT-800-072, LT-800-216 manual There is not sufficient range

Page 23

LT-800 Troubleshooting (cont.)

Troubleshooting

I’m using another brand of receiver - how do I tell which channel to use

Refer to Listen’s Frequency Compatibility Tables (pages 15-17). Adjust Listen’s transmitter to the same frequency as the other major brand. Since Listen products can access 57 channels, they will most likely receive on the same fixed channel or channels of other major brands. If you are using another brand of receiver, make sure you have turned off the SQ feature on the Listen product(s).

There is not sufficient range

First make sure that the receivers you are using are operating properly, then make sure that you have an antenna connected either to the top of the LT-800 transmitter or connected to the back of the unit (but not both!). The antenna should be as high as possible and free of obstacles. In addition make sure you are using the correct antenna type for your unit. You might want to use a remote antenna (provided by Listen) that can be mounted on a mast or wall. Try using different frequencies to find one with less interference.

There is interference in my transmission

Ensure that the transmitter and receivers are on the same channel. Verify that there are no other transmitters on the same channel or a close channel to the one exhibiting interference. Try different channels until you find a clear channel. If this does not work, try a different frequency band (i.e. if you are using 72 MHz, try 216 MHz or vice versa). Please contact Listen support for assistance and a return authorization (RMA) number to exchange product for alternate frequency equipment.

End users are adjusting the unit

First, lock the channel by pressing and holding the channel select UP button for 3 seconds. Consider removing the Input, Mix Level and Contour knobs. You can order a rack mount kit from Listen which offers a security cover that will limit access to the unit.

I am using other manufacturers’ receivers and the sound is distorted

The receiver is probably not designed to handle the +25 kHz deviation of the Listen transmitter. This can be corrected by turning the Mix Level knob down. Another possibility is that you have enabled the SQ function of the LT-800, and this feature is not available in other companies’ products. You will need to disable SQ in this event (see page 8).

If you are using Phonak receivers, the transmitter is capable of operating in the Phonak mode (please refer to page 8).

Several transmitters are operating in the same environment

For this, you’ll need to choose your transmitting frequencies carefully. See page 15-17 for more details.

Can I have two antennas connected to my transmitter

No. The LT-800 transmitter can use only one antenna connection at a time. You may connect either a top mount antenna through the top antenna port, or a remote antenna connected to the BNC connection on the rear of the unit. If multiple antennae are simultaneously connected to both ports the transmitter will have extremely poor broadcast performance and range.

 

 

 

 

Information

 

 

 

 

 

19

 

 

 

 

 

 

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Page Page Page LT-800 Table of Contents Page LT-800 Package Contents Architectural Specifications LT-800 SpecificationsHeadphone LT-800 Block DiagramLT-800 Front Panel Controls & Displays LT-800 Quick ReferenceLT-800 Setup Instructions Set SQ Super Quiet and Process Features To Select Phonak ModeSelect Channel Mode if necessary To Select Expanded ModeInput Set RF PowerConnect Audio Inputs Lock on Channel Power Unit OnLT-800 Operating Instructions Select a ChannelLT-800 Audio Control Adjust Audio Input LevelAdjust Contour Adjust Mix LevelListen SQ Super Quiet Improving Your Listening Experience Coaxial Cable RF Reception Maximization StrategiesChannel Selection If you are using multiple channels follow this processMHz Compatibility Chart CSI AVR Frequency MHz Listen Phonak Phonak Frequency ChartTroubleshooting LT-800 TroubleshootingThere is not sufficient range FCC Statement Compliance Notice & FCC StatementCompliance Notice Contacting Listen Warranty & Contacting ListenWarranty LT-800 Rack Mount Accessories Optional AccessoriesAntenna Accessories Microphone Accessories Cable & Connectors AccessoriesPage Page Page
Related manuals
Manual 31 pages 29.25 Kb

LT-800-072, LT-800-216 specifications

Listen Technologies has established itself as a leading provider of assistive listening systems, and its LT-800-072 and LT-800-216 transmitters are exemplars of their commitment to quality and innovation. These devices are designed to enhance the audio experience in environments where clear sound transmission is crucial, such as theaters, lecture halls, museums, and places of worship.

The LT-800-072 is a powerful, reliable FM transmitter that operates on the 72-76 MHz frequency band. It supports both mono and stereo transmission, making it versatile for various applications. One of its standout features is its robust selectable power output, which allows users to adjust the strength of the transmission based on the specific requirements of the environment, ensuring optimal coverage without interference. This flexibility is particularly beneficial in larger spaces, where sound needs to travel further without losing clarity.

On the other hand, the LT-800-216 is designed for use within the 216 MHz frequency range, offering another layer of versatility for varying listening preferences and regulatory requirements. It boasts a compact design, making it easy to integrate into existing audio systems or set up independently. The device also features a built-in audio input that accommodates multiple audio sources, including microphones, mixers, and other devices, allowing for seamless integration and functionality.

Both transmitters utilize advanced technology to deliver exceptional audio quality. The modulation techniques employed in these devices help eliminate static and background noise, ensuring that users receive crystal clear sound. The inclusion of multiple channels allows simultaneous transmission, which is a significant advantage in settings where multiple languages or presentation options are necessary.

Durability and ease of use are also critical characteristics of the LT-800-072 and LT-800-216. They are constructed with high-quality materials that withstand the rigors of regular use, making them ideal for both permanent installations and portable applications. Additionally, user-friendly controls and clear indicators simplify operation, enabling operators to focus on delivering an excellent auditory experience rather than troubleshooting technical issues.

In summary, the Listen Technologies LT-800-072 and LT-800-216 transmitters provide advanced sound transmission solutions characterized by flexibility, excellent sound quality, and robust build quality. Their capabilities make them suitable for various applications, effectively addressing the diverse needs of listeners in a range of environments.
Top Page Image Contents