Kyocera KM-NET manual Printing System Settings Catalog Right to Left, Booklet Left Edge Binding

Printing System Settings

• Catalog (Right to Left)

Original page order Printing result

Note

If the page order is not in the same order as shown above, the printing results will vary.

• Booklet (Left Edge Binding)

Original page order Printing result

• Booklet (Right Edge Binding)

	Original page order	Printing result
	Note
	Confirm the paper size and load the paper into the cassette
	before printing. For example, to change the booklet configured
	in A4 portrait into the double spread page in A3 size, load the
	A3 size paper. If you load the A4 paper in landscape, a single
	side is reduced in A5 size, and the double spread pages in A4
	are printed.
N-up	Specifies the number of pages per sheet. The following value
	is available: 1, 2 and 4. The default setting is 1.

When N-up settings 2 or 4 are used, the page layouts are as follows.

KM-NET for Direct Printing 7