Amcor ALD 12000M owner manual Drainage, Specifications, How to Drain the Unit

Drainage

During the process of cooling, some water will be extracted from the air into the unit. Most of this water is used to cool the unit and make it run more efficiently. This is a feature not found in most Portable Air Conditioners. If the unit is operated in VERY HUMID air, water will collect in the container inside the unit. If the Internal Water Container is full, the Full Water Indicator will flash, the unit will shut off, and

it must be drained before it will re-start.

How to Drain the Unit

Use a Shallow Container or Dish

1.Turn off the unit.

2.Position a flat container or dish under the drain hole. Do not allow the water to drip continuously into the container, as it might easily overflow.

3.Remove the drain knob & rubber plug from the drain hole.

The condensed water will drain out automatically.

4.When the container is almost full, replace the rubber plug into the drain hole to stop the water. Empty the container.

5.Repeat steps 2, 3 & 4 until all the condensed water is emptied.

6.Once all the condensed water has been removed, replace the rubber plug into the drain hole firmly. The Full Water indicator should be off now.

7.Replace the drain knob.

8.Turn unit on, the unit will resume working.

Specifications

Model Number	ALD 12000M
Cooling Capacity	12,000 BTU/hr
Heating Capacity	N/A
Power Consumption	950W / 8.4A
Humidity Removal Capacity	65 Pts. / Day
Recommended room size*	Up to 400 sq. ft.
Power Supply	115V / 60Hz / 1 Phase
Compressor	Rotary
Refrigerant	R-22
Fan Speed	2
Timer	1-8 hours
Temperature Set Range	62° F - 90° F
Unit Weight	65 lbs.
Dimensions	16"W x 17"D x 30"H
Working Temperature	Cooling: 62° F to 110° F

REMARKS:

The cooling capacity of the unit may be affected by the height of the ceiling, quality of insulation, number of windows, etc.

10 3