Safety Information

Continued

!WARNINGS

Propane Gas: Propane gas is odorless. An odor-making agent is added to propane gas. The odor helps you detect a propane gas leak. However, the odor added to propane gas may fade. Propane gas may be present even though no odor exists.

Make certain you read and understand all warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

•Install and use heater with care. Follow all local ordinances and codes. In the absence of local ordinances and codes, refer to the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and the Natural Gas Installation Code, CAN/CGA B149.2. This instructs on the safe storage and handling of propane gases.

•Use only the electrical voltage and frequency speciﬁed on model plate.

•The electrical connections and grounding of the heater shall follow the Na- tional Electric Code, ANSI/NFPA 70 or Canadian Electric Code, Part 1.

•Electrical grounding instructions — This appliance is equipped with a three- prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle.

•Use only a three-prong, grounded extension cord.

•Use only the hose and factory preset regulator provided with the heater.

•Use only propane gas set up for vapor withdrawal.

•Provide adequate ventilation. Before using heater, provide at least a one-square- foot opening of fresh, outside air for each 100,000 Btu/Hr of rating. This heater produces carbon monoxide, which is listed by the State of California as a reproductive toxin under Proposition 65.

•For indoor use only. Do not use heater outdoors.

•Do not use heater in occupied dwellings or in living or sleeping quarters.

•Do not use heater below ground level. Propane gas is heavier than air. If a leak occurs, propane gas will sink to the lowest possible level.

•Keep appliance area clear and free from combustible materials, gasoline, paint thinner, and other flammable vapors and liquids. Do not use heater in areas with high dust content.

•Minimum heater clearances from combustibles:

Outlet: 6 Ft. Sides: 2 Ft.

Top: 6 Ft.

Rear: 2 Ft.

•Keep heater at least six feet from propane tank(s). Do not point heater at propane tank(s) within 20 feet.

•Keep propane tank(s) below 100° F.

•Check heater for damage before each use. Do not use a damaged heater.

•Check hose before each use of heater. If highly worn or cut, replace before using heater.

•Locate heater on stable and level surface if heater is hot or operating.

•Not intended for use on finished floors.

•Never block air inlet (rear) or air outlet (front) of heater.

•Keep heater away from strong drafts, water spray, rain, or dripping water.

•Do not leave heater unattended.

•Keep children and animals away from heater.

•Never move, handle, or service a hot, operating, or plugged-in heater. Severe burns may result. Wait 20 minutes after turning heater off.

•To prevent injury, wear gloves when handling heater.

•Never attach duct work to heater.

•Do not alter heater. Keep heater in its original state.

•Do not use heater if altered.

•Turn off propane supply and unplug heater when not in use.

•Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use generic parts. Improper replacement parts could cause serious or fatal injuries.

099597

HP35 specifications

The Homelite HP35 is a versatile and powerful chainsaw designed for both professional and residential use. Known for its reliability and efficiency, the HP35 has become a popular choice among landscaping professionals and homeowners alike.

One of the standout features of the Homelite HP35 is its powerful engine. The saw is equipped with a robust 35cc two-stroke engine, delivering impressive performance while maintaining a lightweight design. This power makes it suitable for a variety of cutting tasks, from pruning branches to felling small trees. The engine is designed for easy startup, thanks to its reliable primer bulb and choke system, minimizing frustration during use.

In addition to its powerful engine, the HP35 boasts an ergonomically designed handle that provides comfort even during extended use. The anti-vibration technology integrated into the design reduces fatigue, allowing users to work longer without discomfort. The front and rear handles feature non-slip grips, ensuring better control and safety, particularly when working in challenging conditions.

The Homelite HP35 features a 14-inch bar and chain, making it ideal for maneuvering in tight spaces while still offering the cutting capacity needed for larger limbs and logs. The bar and chain are also designed for easy maintenance, featuring a tool-less design for quick adjustments and replacements. This user-friendly feature is particularly beneficial for those who may not possess extensive chainsaw maintenance experience.

Another notable characteristic of the HP35 is its built-in safety features. The chainsaw comes equipped with a chain brake that engages automatically during kickback scenarios, helping to protect the user from injury. Additionally, the saw has a throttle interlock that prevents accidental acceleration, further enhancing safety during operation.

Fuel efficiency is another significant advantage of the Homelite HP35. The two-stroke engine is designed to maximize fuel usage, allowing for longer run times between refueling. This feature not only makes it more cost-effective for users but also reduces environmental impact due to lower emissions.

In summary, the Homelite HP35 is a reliable chainsaw that combines power, efficiency, and safety features, making it a favored choice among users looking for a robust tool for various cutting tasks. With its lightweight design, ergonomic handle, and advanced technologies, the HP35 is well-equipped to handle both everyday trimming and more demanding jobs with ease.