Homelite UT08512B manual Starting and Stopping, Operating the Blower

Page 10

OPERATION

STARTING AND STOPPING

See Figure 3.

Starting the product differs depending on whether the engine is cold or warm.

TO START A COLD ENGINE:

nPlace the blower on a flat, bare surface.

nMake sure cruise control is locked in the IDLE position. Do not engage the throttle trigger or cruise control during the start-up process.

nPush the primer bulb, slowly, 7 times.

nMove the choke lever to the full choke position marked

START.

nPull the starter rope until the engine runs.

nAllow the engine to run 15 seconds, then engage the throttle trigger to begin operation.

TO START A WARM ENGINE:

nMove the choke lever to the full choke position marked

START.

nPull the starter rope until the engine runs.

TO STOP:

See Figure 4.

Release the throttle trigger and push STOP on the engine switch.

THROTTLE

TRIGGER

PRIMER BULB

CHOKE LEVER

Fig. 3

TO STOP, PUSH

“STOP” ON

ENGINE SWITCH

WARNING:

Keep away from all hot surfaces of the blower. Failure to do so could result in possible serious personal injury.

OPERATING THE BLOWER

See Figures 5 - 6.

�WARNING:

Always hold the blower away from your body, keeping clearance between your body and the product. Any con- tact with the housing can result in burns and/or other serious personal injury.

nHold the blower with the handle in your right hand. (Proper operating position is shown in figure 5.)

nTo keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.

nOperate power equipment at reasonable hours only

— not early in the morning or late at night when people might be disturbed. Comply with the times listed in local ordinances.

�n To reduce sound levels, limit the number of pieces of equipment used at any one time.

10

PROPER OPERATING

POSITION

Fig. 4

Fig. 5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Specific Safety RulesSymbols Symbol Name DESIGNATION/EXPLANATIONService Features Product SpecificationsFeatures AssemblyAssembling the Blower Tubes Mixing the Fuel OperationApplications Premium Exact MIXStarting and Stopping Operating the BlowerCruise Control Throttle Lock To Engage the Cruise ControlGeneral Maintenance MaintenanceLubrication Accessories Troubleshooting Warranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This Product WAS Manufactured with a Catalyst Muffler California Proposition Model Number

UT08512B specifications

The Homelite UT08512B is a robust and efficient string trimmer designed for homeowners and landscaping professionals alike. This versatile tool is known for its lightweight construction, making it easy to maneuver during trimming tasks. Weighing in at just over 10 pounds, the UT08512B allows users to work for extended periods without experiencing significant fatigue.

One of its standout features is the powerful 26cc, 2-cycle engine, which provides impressive cutting power and enhances overall performance. This engine design is aimed at delivering a balance of efficiency and strength, ensuring that users can tackle thick grass and weeds with ease. Additionally, the engine's design supports easy start technology, which reduces the effort needed to crank the engine, making it accessible for users of all skill levels.

The Homelite UT08512B incorporates a 17-inch cutting width, allowing it to cover a larger area in less time. This feature is particularly beneficial for larger yards or commercial applications where efficiency is key. The trimmer also boasts a bump feed line system that ensures a consistent length of cutting line, providing a seamless trimming experience. Users can easily advance the line by gently bumping the trimmer head on the ground, which minimizes interruptions during use.

Ergonomics play a significant role in the design of the UT08512B. The trimmer is equipped with a comfortable, adjustable handle that allows for multiple grip positions. This thoughtful engineering helps users maintain control and comfort, reducing strain on the wrists and arms. Furthermore, the lightweight design contributes to better maneuverability, allowing for precise trimming around flower beds, sidewalks, and other obstacles.

The durability of the Homelite UT08512B is another notable characteristic. Constructed with high-quality materials, the trimmer is built to withstand the rigors of regular use. The design also includes features that minimize maintenance, such as a translucent fuel tank that lets users monitor fuel levels easily, ensuring they can work without interruption.

In conclusion, the Homelite UT08512B is a well-engineered string trimmer that offers a combination of power, efficiency, and user-friendly features. Its lightweight frame, robust 2-cycle engine, generous cutting width, and practical bump feed system make it a reliable choice for tackling trimming tasks effectively. With its ergonomic design and durable construction, users can trust the UT08512B to deliver performance and longevity for years to come.
Top Page Image Contents