Adjusting Time and Date.
The time and the date are transmitted automatically by the radio stations. Should the DAB Radio not receive any information, the time display starts at 00:00:00.
•To activate Full Scan, hold the button AUTOTUNE pressed down until Scan Services Full Scan is shown in the display. Thereafter, the search advance is represented from 0 - 100% by a progress bar. At the end of the search run the number of transmitters found is briefly displayed (X Services found).
Operation
DAB-Mode
In
Should a station already have been received, the radio starts with the last tuned station.
Note:
Unlike an analog radio, with DAB several stations (an Ensemble or Multiplex) are bundled together to a station group and transmitted on one frequency. When the radio has found a station group, the name of the station and the station group are shown in the display.
Station Search (Auto-Tune)
You can choose between two different station search methods: Quick Scan and Full Scan. Quick Scan searches only for the frequencies used in most countries. This function can be used to search for new stations and is quicker than the Full Scan search.
Full Scan examines all frequencies in the DAB III Band. When the station search is finished, the transmitter found first is shown in the display.
•To activate the Quick Scan, first briefly press the button AUTOTUNE. In the display appears Scan Services Quick Scan. Thereafter, the search advance is represented from 0 - 100% by a progress bar. At the end of the search run the number of transmitters found is briefly displayed (X Services found).
Note:
If you wish to conclude the station search prematurely, turn the multi adjustor VOLUME/SELECT.
Accessing the station
1.To call up a found transmitter, press the button JOG MODE/SELECT. In the display appears the indicator <SELECT>.
2.Turn the multi adjustor VOLUME/SELECT to the left or right to show the various stations, one after the other.
3.When the sought after station name is indicated
in the display, press the button JOG MODE/SELECT. In the display the indicator Tuning... appears briefly, after this the sender group is shown once again.
Manual Station Search
1.Hold the button INFO pressed down until Manual Tune appears in the display.
2.Press the button JOG MODE/SELECT.
3Turn the multi adjustor VOLUME/SELECT slowly, and with pauses, to the left or right in order to switch through the various DAB channels for the sender groups (5A - 13F). When a sender group is
found in a DAB channel, the name of the group is indicated in the lower display line.
4.To select a found sender group, press the button JOG MODE/SELECT. The first found sender of this sen- der group appears and, next to it, the transmitter number/the total number of available senders.
5.Turn the multi adjustor VOLUME/SELECT slowly, and with pauses, to the left or right. In this way the saved senders in this sender group can be switched through.
6.When you have selected a sender, press the button JOG MODE/SELECT. You then depart the manual station search.
- 6 -