Fujitsu Important Inverter Notice and Operating Tips for Multi-Type Air Conditioners
Page 19

OPERATING TIPS

Multi-type Air conditioner

This indoor unit can be connected to a multi-type outdoor unit. The multi-type air conditioner allows multiple indoor units to be operated in multiple locations. The indoor units may be operated simultaneously, in accordance with their respective output.

Simultaneous Use of Multiple Units

Instructions relating to inverter (❖) are applicable only to “INVERTER MODEL”.

●When using a multi-type air conditioner, the multiple indoor units can be operated simultaneously, but when two or more indoor units of the same group are oper- ated simultaneously, the heating and cooling efficiency will be less than when a single indoor unit is used alone. Accordingly, when you wish to use more than one in- door unit for cooling at the same time, the use should be concentrated at night and other times when less out- put is required. In the same way, when multiple units are used simultaneously for heating, it is recommended that they be used in conjunction with other auxiliary space heaters, as required.

●Seasonal and outdoor temperature conditions, the struc- ture of the rooms and the number of persons present may also result in differences of operating efficiency. We recommend that you try various operating patterns in order to confirm the level of heating and cooling out- put provided by your units, and use the units in the way that best matches your family's lifestyle.

●If you discover that one or more units delivers a low level of cooling or heating during simultaneous opera- tion, we recommend that you stop simultaneous opera- tion of the multiple units.

❖● Operation cannot be done in the following different op- erating modes.

If the indoor unit is instructed to do an operating mode that it cannot perform, the OPERATION indicator lamp (red) on the indoor unit will flash (1 second on, 1 sec- ond off) and the unit will go into the standby mode.

Heating mode and cooling mode (or dry mode)

Heating mode and fan mode

❖● Operation can be done in the following different operat- ing modes.

Cooling mode and dry mode

Cooling mode and fan mode

Dry mode and fan mode

❖● The operating mode (heating mode or cooling (dry) mode) of the outdoor unit will be determined by the op- erating mode of the indoor unit that was operated first. If the indoor unit was started in fan mode, the operating mode of the outdoor unit will not be determined.

For example, if indoor unit (A) was started in fan mode and then indoor unit (B) was then operated in heating mode, indoor unit (A) would temporarily start opera- tion in fan mode but when indoor unit (B) started oper- ating in heating mode, the OPERATION indicator lamp (red) for indoor unit (A) would begin to flash (1 second on, 1 second off) and it would go into standby mode. Indoor unit (B) would continue to operate in heating mode.

Notice

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

*● During use of the heating mode, the outdoor unit will occasionally commence the defrost operation for brief periods. During the defrosting operation, if the user sets the indoor unit for heating again, the defrosting mode will continue, and the heating operation will begin after completion of defrosting, with the result that some time may be required before warm air is emitted.

*● During use of the heating mode, the top of the indoor unit may become warm, but this is due to the fact that coolant is circulated through the indoor unit even when it is stopped; it is not a malfunction.

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operating Manual Safety Precautions ContentsHeat & Cool Model Reverse Cycle Features and FunctionsCooling Model Heat & Cool Model Reverse Cycle Test RUN Timer Indicator Lamp greenPreparation Press the Time Adjust button againTo Use the Remote Control Unit Remote Control Unit HolderTo Set the Fan Speed Press the FAN Control button To Select Mode Operation Press the START/STOP button JOperation To Set the Thermostat Press the SET TEMP. buttons FFan Cooling Model About Mode OperationWhen set to Quiet To Stop Operation Press the START/STOP buttonDry Auto Cooling ModelFan Will display Timer OperationSet the desired times for OFF timer and on timer About the Program timerDuring Heating operation Sleep Timer OperationTo Change the Timer Settings About the Sleep timerRight-Left Adjustment Adjust the Right-Left louvers Adjusting the Direction of AIR CirculationTypes of Air flow Direction Setting About Swing Operation Swing OperationManual Auto Operation To select Swing Operation Press the Swing Louver button LCleaning and Care Install the two air filters and close the intake grille Install the air cleaning filter set setAir cleaning filter set Replace them by two new air cleaning filters Replacing dirty Air cleaning filtersMaintenance of Deodorizing Filters Symptom Problem TroubleshootingOperation and Performance Operating TipsAuto Restart Simultaneous Use of Multiple Units Multi-type Air conditionerCooling Operation Temperature and Humidity RangeHeating Operation

AST7, AST9, AST12 specifications

Fujitsu has long been recognized as a leading provider of advanced servers and technology solutions, and among its various offerings, the AST series stands out. The AST12, AST9, and AST7 represent a range of high-performance servers designed to meet diverse business needs.

The Fujitsu AST12 is geared towards enterprises looking for robust performance in a compact design. It supports the latest generation of Intel processors, ensuring that users have access to powerful computing capabilities. One of its standout features is the scalable architecture, which allows businesses to expand their systems as their needs grow. The AST12 supports high memory capacities and features multiple storage options, including NVMe SSDs and traditional HDDs, enabling users to optimize their storage strategy. Additionally, the server is designed with advanced energy efficiency technologies, reducing operating costs while maintaining performance.

Moving on to the Fujitsu AST9, this version is tailored for mid-sized businesses that require a balance of performance and efficiency. The AST9 incorporates several virtualization features, making it an excellent choice for organizations looking to consolidate their workloads. With support for various operating systems and virtualization platforms, users can deploy applications seamlessly across their infrastructures. The AST9 is also equipped with enhanced security features, including hardware-based encryption and secure boot options, ensuring that data remains protected against evolving threats. Its management tools simplify system monitoring and maintenance, allowing for proactive management of resources.

The Fujitsu AST7, while the most compact of the series, does not compromise on performance. This server is ideal for smaller businesses or remote offices that require reliable computing solutions without the bulk of larger systems. The AST7 is designed for easy deployment and management, incorporating features that assist IT teams in maintaining optimal performance levels. It supports remote management, allowing administrators to monitor and troubleshoot systems without being physically present. The AST7 also emphasizes energy efficiency, ensuring that even small businesses can keep their operational costs low while benefiting from high-quality server technology.

In summary, the Fujitsu AST series—comprising the AST12, AST9, and AST7—provides a wide range of solutions tailored to meet various business needs. From high scalability and performance in the AST12 to the balanced efficiency of the AST9 and the compact design of the AST7, Fujitsu delivers versatile technology that caters to the modern enterprise's demands while ensuring reliability, security, and ease of management.
Top Page Image Contents