Gas-Fired Products specifications ETS/ETU Series Layouts, ETS Series

Page 4

ETS/ETU SERIES LAYOUTS

ETS/ETU SERIES LAYOUTS

The ETS/ETU series, with more than 100 different configurations, offers optimum flexibility in custom designing an infrared heating system. The ETS series is available in multiple configurations (straight, L, Z, and expanded U-shape) with lengths from 15’ to 80’ long. For added versitality, 90° elbows, corner reflectors, and side reflectors are available for close area mounting near walls, doors, and corners. The ETU series is available in seven different configurations and provides more uniform radiant heat energy distribution. The ETU series is ideal for high heat loss areas and spot heating.

LEGEND

CONTROL UNIT

DRAFT INDUCER

10FT. BODY SECTION

5 FT. BODY SECTION

90° ELBOW

180° U BEND

 

 

 

 

 

 

 

ETS SERIES

STRAIGHT L-SHAPE

EXPANDED

Z-SHAPE

U-SHAPE

15 FT SYSTEM

20 FT SYSTEM

25 FT SYSTEM

STRAIGHT L-SHAPE

EXPANDED

Z-SHAPE

U-SHAPE

 

 

40 FT SYSTEM

45 FT SYSTEM

30 FT SYSTEM

35 FT SYSTEM

50 FT SYSTEM

Only 15 ft. to 50 ft. systems are shown. Please refer to the Installation and Operation Instructions for complete layouts.

ETU SERIES

20 FT SYSTEM

30 FT SYSTEM

40 FT SYSTEM

50 FT SYSTEM

COMBUSTION AIR AND VENTILATION

Combustion air and venting requirements for all gas-fired heating equipment must be provided per the National Fuel Gas Code NFPA54 or the authority having jurisdiction over the installation. In contaminated atmospheres or high humidity areas, optional outside air for combustion can be supplied. Heaters can be common vented, direct vented, or indirect vented. Refer to the Installation and Operation Instructions for further information. A vented installation must be vented to the outside of the building with a flue pipe. An Indirect vented installation requires a minimum ventilation flow of 4 CFM per 1000 Btu/hr of total installed heater capacity on natural gas by either gravity or power ventilation (4.18 CFM per 1000 Btu/hr on propane). For indirect vented applications, building exhaust openings must be located above the level of the heaters and inlet air openings must be located below the level of the heaters.

FOR YOUR SAFETY

OPERATE SPACE-RAY GAS INFRARED HEATERS WITH PROPER CARE AND OBSERVE ALL SAFETY PRECAUTIONS. Installation and service must be performed by a licensed con- tractor. The installation must conform to local codes. In the absence of local codes, the installation must conform to the National Fuel Gas Code ANSI Z223.1 (latest edition, also known as NPFA54) or CAN / CSA-B149 installation codes (latest edition). These codes are available from the National Fire Protection Association, Inc., Batterymarch Park, Quincy, MA 02269 or the Canadian Gas Association, 55 Scarsdale Road, Toronto, Ontario MB3 2R3 Canada.

A Division of Gas-Fired Products, Inc.

P.O. Box 36485 Charlotte, NC 28236 Telephone (Toll Free) 1-800-438-4936 (704) 372-3485 Fax (704) 332-5843

www.spaceray.com • email: info@spaceray.com

Copyright 2003, GFP INC. 10325M

FORM#S45504

Image 4
Contents Specifications SPACE-RAY…A Trusted Name in Infrared HeatingHeating Technology for the Next Millennium 30%-50% Fuel SavingsETS/ETU Series Features Model SelectionsMinimum Recommended Mounting Heights DimensionsMinimum Clearances to Combustibles ETS Series ETS/ETU Series LayoutsETU Series

ETU Series, ETS Series specifications

The Gas-Fired Products ETS Series and ETU Series represent innovative advancements in heating technology designed for efficient and effective gas combustion. These product lines are tailored for both residential and commercial applications, providing reliable and sustainable heating solutions with high-performance metrics.

The ETS Series is notable for its exceptional energy efficiency, utilizing advanced combustion technologies to minimize gas consumption while maximizing thermal output. This series is engineered with a robust heat exchanger that enhances heat transfer and reduces emissions, adhering to stringent environmental regulations. This innovative design allows for lower operational costs and reduced environmental impact, making it an ideal choice for eco-conscious consumers.

In contrast, the ETU Series is focused on versatility, catering to various heating needs through multiple configurations and sizes. This series integrates cutting-edge control systems that enable precise temperature management and improved system responsiveness. Users can benefit from programmable settings and smart home integration, which not only enhance convenience but also lead to significant energy savings.

Both series are equipped with durable components built to withstand the rigors of daily use. High-quality materials and construction methods ensure longevity and reduced maintenance requirements, further supporting cost-effectiveness over the product lifecycle. Furthermore, the compact design of both the ETS and ETU Series allows for easy installation, even in limited spaces, making them suitable for a wide range of environments.

Safety is a paramount consideration in both series, incorporating multiple safety features such as flame failure detection, overheat protection, and pressure monitoring systems. These technologies work in tandem to ensure secure operation, giving peace of mind to users.

In summary, the Gas-Fired Products ETS Series and ETU Series exemplify the latest in heating technology, offering energy efficiency, versatility, durability, and safety. Their advanced features and technologies make them an excellent choice for anyone looking to invest in reliable and sustainable gas heating solutions, helping achieve comfort while being mindful of energy consumption and environmental considerations.