Holmes HS4600 warranty ADJUSTABLE-TILT Instructions, During Season Care, After Season Care

2.When the desired temperature/ comfort level is reached, lower the thermostat setting until the fan/heater stops operating.

3.The control will now automatically maintain the pre-set temperature level by turning the heater ON and OFF.

NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the thermostat setting.

ADJUSTABLE-TILT INSTRUCTIONS:

1.Carefully adjust the unit to direct the heat flow.

2.To adjust the tilt angle of your heater, first loosen the Tilt Adjustment Knob.

3.Then simply adjust the heater to the desired angle and re-tighten theTilt Adjustment Knob.

CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN OPERATION

Figure 1

B

AC

D

E

A. THERMOSTAT CONTROL KNOB

B. (TEMP) SELECTOR CONTROL KNOB

C. POWER LIGHT

D. TILT ADJUSTMENT KNOB

E. HEATER BASE TUBE

Figure 2	CONTROL PANEL VIEW
		OFF
LO	HI
THERMOSTAT		h SELECTOR

THIS PRODUCT IS EQUIPPED WITH A 3-PRONG PLUG

Make sure the electrical receptacle is of the configuration and capacity appropriate for the heater (see below). An adapter as shown in (fig.C) is available in most hardware stores for connecting three bladed grounding type plugs to two slot receptacles.

The green grounding lug must be

connected to a permanent ground such as a properly grounded outlet box, as shown in (fig.B). The adapter should not be used if a three slot grounded receptacle is available.

(Fig. A) (Fig. B) (Fig. C)

CLEANING/MAINTENANCE INSTRUCTIONS:

During Season Care:

1.Before cleaning, be sure to turn off and unplug the heater.

2.Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating elements.

3.After cleaning, be sure to completely dry the unit with a cloth or towel.

After Season Care:

1.Store heater in a cool, dry location.

2.Holmes® recommends that you store the unit in its original carton.

Page 3