Holmes HANF96 warranty These Important

Page 2

PLEASE READ AND SAVE

THESE IMPORTANT

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed including the following:

Use fan only for intended use as described in instruction manual.

To protect against electrical shock do not place fan in window, immerse unit, plug or cord in water or spray with liquids.

Close supervision is necessary when any appliance is used by or near children.

Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts, and before cleaning.

Avoid contacting moving parts.

Do not operate in presence of explosive and/or flammable fumes.

Do not place fan or any parts near an open flame, cooking or other heating appliances.

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been dropped or dam- aged in any manner.

The use of attachments not recommended or sold by the appli- ance manufacturer may cause hazards.

Do not use outdoors.

Do not let cord hang over edge of table or counter, or touch hot surfaces.

To disconnect, grip plug and pull from wall outlet. Never yank on cord.

Always use on a dry, level surface.

Do not operate without fan grills properly in place.

This product is intended for household use ONLY and not for commercial or industrial use.

PLEASE READ AND SAVE

THESE IMPORTANT

SAFETY INSTRUCTIONS

THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current)PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS

POLARIZED PLUG IN ANY WAY.

OPERATING INSTRUCTIONS

Step 1: Set fan onto a dry, level surface.

Step 2: Plug cord into any standard 120 volt AC outlet. Please make sure the Selector (Speed) Control is in the "O" Off position.

Step 3: Selector (Speed) Control is located behind the rear grill. The speed is adjusted by turning the control knob to the desired setting, Off-High-Low. ( O-II-I)

ILLUSTRATIONS

Front Grill

Controls (not shown)

Rear Grill

Base

Image 2
Contents Adjustable Tilt These Important Do not use any strong cleaner gasoline, thinner, benzine Remove front guard/grill from the rear guard grillF117.01 Holmes Group, IncBox Milford, MA Mark the outside of your package