Assembly Instructions, Operating Instructions

Metal ends

P L E A S E R E A D A N D S AV E T H E S E

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

F E AT U R E S - O P E R AT I O N S

C L E A N I N G / M A I N T E N A N C E

When using electrical appliances, basic safety precautions

should always be taken including the following:

1.Read all instructions before using this appliance.

2.Use fan only for purposes described in the instruction manual.

3.To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.

6.Avoid contact with moving parts.

7.Do not operate in the presence of explosive and/or flammable fumes.

8.To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.

9.Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for examination and/or repair.

10.Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

11.The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.

12.Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.

13.Do not use outdoors.

14.To disconnect, grip plug and pull from wall outlet. Never yank on cord.

15.Always use on a dry, level surface.

16.Do not operate fan until fully assembled with all parts properly in place.

17.This product is intended for household use ONLY and not for commercial or industrial applications.

18.WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.

19.WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

20.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

PLEASE READ AND SAVE

THESE IMPORTANT

SAFETY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Assembly Time: 5-10 Minutes

Tools Required: Phillips Head Screw Driver

1.Assemble Base Halves around the power cord. Refer to Fig 2.

Fig 1		E
		A.	Front Grill
A		B.	Base Halves (2)
A		C.	Thumb Screws (2)
		D.	Fan Housing
		E.	Control Panel
	D	F.	Power Cord
	D	G.	Speed Control
		G.	Speed Control
		H.	Timer Control
		I.	Oscillation Control
		F
			Thumb Screw

Fig 2

2.Secure assembled base to the Fan Housing with two thumb screws (Fig 2).

3.Secure Power Cord as shown in Fig 3 & 4.

Fig 3

Fig 4

OPERATING INSTRUCTIONS

1.Set the fan on a dry level surface.

2.Plug cord into any standard 120V AC outlet.

3.To turn the fan on, press the desired SPEED button « I II III » on the Control Panel.

4.To oscillate the fan head, press the OSCILLATION

button « » on the Control Panel. Press a second time to stop oscillation. To turn the fan off, push the

off button «

».

5. To activate the timer feature turn the Timer Control

Fig 5			G
H			I
			I
III		II
		II
	I	I
	I	O	O
120			O
120
100		20
80		40
	60
CLEANING/MAINTENANCE
INSTRUCTIONS

Follow these instructions to correctly and safely care for your Tower Fan. Please remember:

REPLACEABLE FUSE

If your (5 Amp, 125 Volt) replaceable fuse blows, please visit our website at www.holmesproducts.com for information on how to order a new fuse. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

1.Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2.Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.

Note: Ensure that fuse

Fig 6cover is completely open

125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.

Caution: Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.

5.Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing down on metal ends of the fuse.

6.Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

FAN CLEANING

•Always unplug the fan before cleaning.

•Clean the fan with a soft cloth moistened with a mild soap solution.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, benzene.

•We also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit.

Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base and head. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE

In the off-season, it is important to keep your fan in a safe, dry location.

• We recommend using the original (or appropriately

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS

SAFETY FEATURE IN ANY WAY.


«	» clockwise to your desired duration (0-120
minutes). For continuous running turn the Timer
Control «		» to « I ». To turn the fan off, turn the

Timer Control «

» to «

» or push the off button

«» on the control panel.

NOTE: Timer must be in « I » position to run continuously.

	before attempting to	Fuse
	remove fuse.	Fuse
	remove fuse.	Fuse cover
	3. Remove fuse carefully by	Fuse cover
	3. Remove fuse carefully by
	using a small screwdriver
	to pry the fuse out of the

compartment by the metal ends of the fuse (see Fig 6).

4. Place plug on a solid, flat surface. Insert new 5 Amp,

sized) box.

• Please remember to protect the fan from dust or

moisture.

If you have any questions regarding your product or would like to learn more about other Holmes® products, please visit our website at www.holmesproducts.com.

HT38_13EM1.indd 2

12/6/12 8:33 AM

HT38U, HT38 specifications

The Holmes HT38U and HT38 offer a cutting-edge solution in the realm of HVAC (Heating, Ventilation, and Air Conditioning) technology, designed for both residential and commercial applications. These units come equipped with advanced features that prioritize efficiency, user comfort, and environmental sustainability.

One of the standout features of the Holmes HT38U and HT38 is their high-performance heating and cooling capabilities. With a robust output, these systems can quickly adjust to desired temperatures, ensuring a comfortable environment regardless of external weather conditions. The units are engineered to deliver powerful airflow while maintaining low noise levels, making them ideal for bedrooms, offices, and other spaces where peace is essential.

The HT38U and HT38 incorporate advanced inverter technology, enhancing energy efficiency and providing consistent temperatures. This innovative technology allows the system to continuously adjust its output based on real-time demands, minimizing energy waste and reducing utility bills. By utilizing this approach, the Holmes units are an environmentally friendly option, contributing to reduced carbon footprints.

User-friendliness is also a hallmark of the HT38U and HT38. Each unit features an intuitive control panel and a remote control option, enabling users to modify settings and schedules effortlessly. The integrated smart features allow for compatibility with mobile applications, giving users the ability to monitor and control their HVAC systems remotely.

Additionally, both models are designed with hygiene in mind. They feature advanced filtration systems that capture dust, allergens, and other airborne particles, contributing to improved indoor air quality. This makes them an excellent choice for individuals with allergies or respiratory conditions, as well as families looking to maintain a healthy living environment.

Durability is another key characteristic of the Holmes HT38U and HT38. Constructed from high-quality materials, these units are built to withstand various environmental conditions, ensuring longevity and reliable performance. The sleek and modern design also adds aesthetic value, making them a stylish addition to any space.

In summary, the Holmes HT38U and HT38 are modern HVAC solutions that excel in heating and cooling performance, energy efficiency, and user convenience. With their advanced technologies, robust features, and focus on air quality, these systems represent an ideal choice for those seeking a reliable and effective climate control solution.