Holmes HT30 warranty Operating Instructions, FAN Storage, CLEANING/MAINTENANCE Instructions

FEATURES - OPERATIONS

OPERATING INSTRUCTIONS

IMPORTANT:

Step 1: Set the fan base on a dry, level surface.

Step 2: Plug the cord into any standard 120-volt A/C outlet. To turn the fan on press one of the three speed buttons marked (1) low, (2) medium, or (3) high. To turn the fan off press the button marked (0) off.

Step 3: The SPEED is adjusted by pressing one of the three buttons for your desired level of cooling comfort.

Step 4: The OSCILLATION button is located on the top of the fan control panel. To start oscillation, push button down. To stop oscillation, push the button again.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your Holmes Tower Fan. Please remember:

•Always unplug the fan before cleaning or disassembling.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, benzine.

•We also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit.

Fan Head and Base Cleaning

Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing. Please use caution around

the grills. Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE

Your fan can be stored in the off-season either partially disassembled or assembled. It is important to keep it in a safe, dry location.

•If stored disassembled, we recommend using the original (or appropriately sized) box.

•If stored assembled or partially assembled, remember to protect the fan head from dust.

FIGURE 3

C

D

E

FIGURE 4

F

G

H

A. THUMB SCREW (FIGURE 1)

B. CORD CLIP (FIGURE 2)

C. DUST FLAP (FIGURE 3)

D. OSCILLATION BUTTON (FIGURE 3)

E. SPEED CONTROL BUTTONS (FIGURE 4)

F.FAN HOUSING (FIGURE 4)

G.FRONT GRILL (FIGURE 4)

H.BASE (FIGURE 4)