HAP1200_07EM1.qxd 6/8/07 9:10 Page 2
S A F E T Y I N S T R U C T I O N S
F E AT U R E S
O P E R AT I O N S ,
C L E A N I N G / M A I N T E N A N C E
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include:
1.Read all instructions before using the appliance.
2.To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.
3.If the filter is covered by a bag when shipped, remove plastic bag before use.
4.Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.
5.To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
6.Close supervision is necessary when any appliance is used by or near children, or disabled persons.
7.Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filters and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
8.NEVER drop or insert any objects into the openings of the unit.
9.Do not operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair.
10.Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Jarden Consumer Solutions may cause hazards.
11.DO NOT use outdoors.
12.NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.
13.Keep unit away from heated surfaces and open flames.
14.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by Jarden Consumer Solutions or an authorized Jarden Consumer Solutions Center.
15.DO NOT place anything on top of unit.
16.NEVER use detergents, gasoline, glass cleaner,
furniture polish, paint thinner, or other household solvents to clean any part of the appliance.
17.Always turn the appliance off before unplugging it.
18.The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on.
19.This appliance should only be used in a room with temperatures between 40° F and 110° F.
20.WARNING: To reduce the risk of fire or electric shock, DO NOT use this air purifier with any
PLEASE SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS
PLUG SAFETY
CAUTION: To reduce the risk of electric shock, THIS APPLIANCE HAS A POLARIZED
PLUG (one blade is wider than the other). This plug is intended to fit in to a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet.
DO NOT ALTER THE PLUG IN ANY WAY.
CORD SAFETY
•The length of cord used on this appliance was selected to reduce tangling or tripping hazards.
•If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical rating of the air purifier (see rating label marked on product).
•Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
GET TO KNOW YOUR AIR PURIFIER
Your Holmes® air purifier features a LifeLongTM
•Permanent filters can be vacuumed every few months for easy cleaning.
•Washable
•Optional ionizer naturally improves performance and helps freshen the air.
•Slim tower design allows placement in almost any area of the room.
IONIZER
This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and completely harmless.
How Does The Ionizer Work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system.
Important Notes:
Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.
After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer’s air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth.
Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.
•This may occur more frequently when the filter is nearing the end of its useful product life and unable to capture as many charged particles.
•Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter(s) and interfere with the ionization process.
To help prevent particles from attracting to surfaces throughout your home:
•You may want to run the ionizer less often.
•Check the condition of the filter(s) more frequently.
CAUTION: The ionizer in this appliance produces less ozone than the UL* established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on.
IMPORTANT: Always clean the LifeLongTM filter at the recommended intervals (See CLEANING THE LifeLongTM FILTER). Using the ionizer with dirty filters may result in dirty particles exiting the air purifier and attracting to walls, carpets, furniture, or other household objects. These dirty particles may prove difficult to remove.
HEPA-TYPE LifeLongTM FILTER
The LifeLongTM filter allows easy maintenance and eliminates the hassle of filter replacement.
HIGH, MEDIUM AND LOW SPEED SETTINGS
For optimum air filtration, operate your Holmes® air purifier continuously on the HI setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select LOW setting.
*tested and listed by the Underwriters Laboratories, Inc.
BEFORE USE
1.Carefully unpack your air purifier.
2.Select a firm, level surface with no obstructions to the air inlets or outlets.
3.If the filter is covered by a bag when shipped, remove plastic bag before use and place filters into unit.
OPERATING INSTRUCTIONS
IMPORTANT:
•Remove all plastic bags from filters before use.
•DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.
To operate your air purifier:
1.Plug into a 120V AC electrical outlet.
2.Select the operating speed of HIGH ( ), MEDIUM
( | ) or LOW ( | ) by turning the speed control |
knob to the appropriate setting.
3.To release negative ions into the filtered air, turn the Ionizer Knob ( ) to ON and the light will illuminate.
4.The ionizer will not work unless air purifier is running.
5.For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor has been designed to give many years of use.
Fig. 1
A
B
| D |
C | E |
| F |
A. Ionizer Knob | E. Washable Foam |
B. Speed Control Knob | |
C. Filtered Air Outlet | F. LifeLong™ |
D. Air Intake Grill | Filters |
CLEANING AND MAINTENANCE
CLEANING THE LifeLongTM FILTER
The LifeLongTM filter is designed to never need replacement. However, we recommend regular cleaning for optimal performance.
To clean your filter:
1.Turn off and unplug the air purifier.
2.Remove the air inlet grill.
3.Remove and examine the foam
•If it has collected dust or lint, remove and wash it in warm soapy water. Rinse and drip dry thoroughly before placing it back into the grill inlet.
4.Check the condition of LifeLongTM filters and remove if dirty.
5.Clean the LifeLongTM filter.
• Using your vacuum cleaner, run the
brush attachment along both sides of
the filter and clean between the pleated
layers (Fig 2).
IMPORTANT: Do not use water, household cleaners or detergents to clean the LifeLongTM filter.
REINSTALLING THE LifeLongTM FILTER AFTER CLEANING
Note: A hang tab and filter clips ensure the filter attaches properly.
1. Make sure the hang | Fig. 3 | |
tab is securely in place. | ||
| ||
Align the clip on the |
| |
top of the LifeLongTM |
| |
filter with the rails on |
| |
the inside of the unit. |
| |
Gently slide the filter | Fig. 4 | |
onto the rail (see Fig 3 | ||
| ||
and 4). |
| |
2. Place air inlet grill back |
| |
onto unit securely. |
|