Operating Instructions, Adjustment Instructions

ASSEMBLY INSTRUCTIONS CONTINUED

Fan Head Assembly

NOTE: Remove the plastic piece covering the motor shaft and discard. Also remove the plastic covering the logo plate.

Step 1: Position the rear grill over the motor shaft, making certain the 3 holes at the top and bottom of the rear grill fit over the

3 prongs on the motor housing. Please make sure the rear grill fits securely against the motor housing.

Step 2: Secure the rear grill in its place using the rear grill mounting-nut. Turn this ring clockwise and tighten firmly.

Step 3: Slide the fan blade; with the hollowed interior of the blade facing towards the rear grill firmly onto the motor shaft. Make sure the shaft protrudes from the front of the blade.

Step 4: Secure the fan blade onto the motor shaft by turning the blade cap in a counter-clockwise direction until it is firmly in place.

Step 5: Center the front grill by aligning the Holmes logo so it is horizontal and parallel to the floor. Then secure the front and rear grills completely together by placing the front grill onto the back grill making sure the Holmes logo is straight. Then close and lock the clips into place around both grills.

Final Assembly

Step 1: Place and slide the upper pole and fan head assembly onto one of the extension poles. Then, simply insert the fan post screw into the hole and tighten until a secure fit is obtained.

OPERATING INSTRUCTIONS

Step 1: Set the fan base on a dry, level surface.

Step 2: Please make sure the On/Speed knob is in the "O" Off position. Plug the cord into any standard 120-volt A/C outlet.

Step 3: The SPEED is adjusted by moving the knob left or right to the desired setting.

Step 4: The OSCILLATION control knob is located on the top of the fan motor housing. To start oscillation, push control knob down. To stop oscillation, pull control knob up.

ADJUSTMENT INSTRUCTIONS

Tilt Adjustment

To change the tilting angle of the fan head, move the fan head to the desired angle.

Height Adjustment

(See instructions for base/pole assembly)

This fan is equipped with two extension poles, which allow you to adjust the height of the fan for two height settings.

CLEANING/MAINTENANCE

Follow these instructions to correctly and safely care for your Holmes stand fan. Please remember:

•Always unplug the fan before cleaning or disassembling.

•Do not allow water to drip on or into the fan motor housing.

•Do not use any of the following as a cleaner: gasoline, thinner, benzine

(See instructions for fan head assembly)

Step 1: To access the fan blade, remove the front grill and the fan blade nut.

Step 2: Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution.

Step 3: Replace blade, tighten the fan blade nut, and securely fasten the front grill.

Fan Head, Base, and Pole Cleaning

Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base, pole, and head. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

HASF1705, HASF1320 specifications

Holmes HASF1320 and HASF1705 are two innovative air purification solutions designed to enhance indoor air quality. These models feature advanced filtration systems tailored to meet diverse needs for clean air in various environments, including homes, offices, and other indoor spaces.

The Holmes HASF1320 is particularly known for its compact and efficient design, allowing it to fit seamlessly into smaller spaces while delivering effective air purification. This model is equipped with a high-performance HEPA filter capable of capturing up to 99% of airborne allergens, including dust, pollen, mold spores, and pet dander. The HASF1320 also incorporates a pre-filter that helps to trap larger particles, extending the life of the HEPA filter and ensuring optimal performance.

One of the key technologies utilized in the HASF1320 is the activated carbon filter, which works to neutralize unpleasant odors from cooking, pets, and smokers, enhancing the overall air quality. Additionally, the model is designed with multiple speed settings, allowing users to customize the airflow based on their specific needs and preferences. Its quiet operation makes it suitable for use in bedrooms or quiet working environments.

On the other hand, the Holmes HASF1705 is a more powerful air purifying system suitable for larger spaces. With a larger HEPA filter, the HASF1705 provides increased air coverage, making it ideal for living rooms, open areas, or even office settings. Similar to the HASF1320, it features a pre-filter and a carbon filter for comprehensive purification.

What sets the HASF1705 apart is its innovative smart sensor technology, which automatically detects the air quality and adjusts the fan speed accordingly. This feature not only enhances convenience but also ensures energy efficiency, as the unit operates at optimal levels based on real-time air quality conditions. The HASF1705 also includes a filter change indicator, reminding users when it's time to replace filters for continued effectiveness.

Both models come with a user-friendly design, including intuitive controls and easy maintenance features. They are also both aesthetically pleasing, allowing them to blend well with existing home décor while promoting healthier indoor environments. Ultimately, the Holmes HASF1320 and HASF1705 represent excellent options for consumers seeking effective and efficient air purification technologies, combining advanced features to tackle indoor air pollution and enhance overall well-being.