Important Safeguards

When using electrical appliances, basic precautions should always be followed to the reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read all instructions before using this heater.

2.If your appliance is equipped with a polythene tape used as carry handle, remove it before con- necting the appliance to the outlet.

3.This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use the built-in handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0,9 m) away from the front, top, sides and rear of the heater.

4.Extreme caution is necessary when the heater is used by or near children and whenever the hea- ter is left operating unattended.

5.Always unplug heater when not in use.

6.Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. If heater has leaked any oil, discontinue using the heater and contact the service center as indicated in the instruction leaflet. Return heater to autho- rized service facility for examination, electrical or mechanical adjustment, or repair.

7.Do not use outdoors.

8.Never place this heater where it may fall into a bathtub or any other water container.

9.Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, run- ners, or the like. Arrange cord away from traffic area and where it will not be tripped over.

10.To disconnect heater, turn controls to off, then unplug it.

11.Connect to properly polarized outlets only.

12.Do not insert or allow any foreign object to enter the air intakes or the exhaust as this may cause an electric shock, the risk of fire, or damage to the heater.

13.To prevent the risk of fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where air openings may become blocked.

14.A heater has hot or arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

15.Use this heater only as described in this manual. Any other use not recommended by the manu- facturer may cause the risk of fire, electric shock, or injury to persons.

16.To prevent overload and blown fuses, be sure that no other appliance is plugged into the same outlet or into another outlet wired into the same circuit.

17.It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord which beco- mes hot to the touch or becomes distorted in shape may be the result of a worn electrical outlet. Worn outlets should be replaced prior to further use of the heater. Plugging heater into a worn outlet may result in overheating of the power cord or fire.

18.This heater is not intended for use with an extension cord. Plug the cord directly into an appro- priate wall outlet.

19.Be sure that the plug is fully inserted into an appropriate outlet. Please remember that outlets also deteriorate due to aging and continuous use: check periodically if signs of overheating or defor- mations are present on the plug. If the oulet is deteriorated or damaged, do not use it and CALL your electrician.

20.Check that neither the appliance nor the power cable have been damaged in any way during transportation.

21.Make sure that no pieces of polystyrene or other packaging material have been left between one element of the appliance and another.

22.When switching on the appliance for the first time, allow it to run at full power for at least two hours to get rid of the unpleasant smell. Make sure that the room in which the appliance is loca- ted is well ventilated during this operation. It is normal for the appliance to emit small crackling sounds when you turn it on for the first time.

23.CAUTION: to prevent electric shock match wide blade of plug to wide slot, then fully insert.

24.Do not cover the appliance while it is functioning in order to avoid overheating and the risk of fire.

SAVE THESE INSTRUCTIONS

trn0812tk specifications

The Kenwood TRN0812TK is a standout in the realm of portable two-way radios, designed to enhance communications in various environments, whether for casual use, business, or specialized applications. This versatile model boasts a range of features that make it suitable for numerous industries, including hospitality, construction, and event management.

One of the key features of the Kenwood TRN0812TK is its robust design. The radio is engineered to withstand harsh conditions, providing excellent durability and reliability. It adheres to the IP54 standard, which means it is dust-protected and water-resistant, ensuring continued operation even in challenging weather situations.

The TRN0812TK comes equipped with a powerful 1600 mAh lithium-ion battery, which offers extended operational time and the convenience of longer communication without the need for frequent recharging. The inclusion of an energy-saving function further prolongs battery life, making it an efficient choice for those who rely on their communication devices.

In terms of sound quality, the TRN0812TK delivers crystal-clear audio with minimal distortion, making it easy to hear and be heard even in noisy environments. The device features a powerful speaker that enhances audio clarity, ensuring that important messages are transmitted effectively.

Another notable aspect of the Kenwood TRN0812TK is its user-friendliness. The radio is equipped with a simple interface, allowing users to navigate through channels and adjust settings with ease. The backlit display also ensures visibility in low-light conditions, promoting usability during nighttime operations.

The TRN0812TK incorporates several advanced technologies, such as Dual Watch and QT (Quiet Talk) Code. Dual Watch allows users to monitor two channels simultaneously, which is perfect for coordinating efforts across different parties. QT Code adds an extra layer of privacy to conversations by filtering out unwanted transmissions, ensuring that communications stay confidential.

Furthermore, the TRN0812TK supports both analog and digital modes, providing flexibility for users who need versatile communication options. This adaptability makes it ideal for various applications, from event planning to team coordination in emergency situations.

Overall, the Kenwood TRN0812TK stands out as a reliable, durable, and technologically advanced communication tool. Its array of features, user-friendly design, and exceptional audio quality make it a preferred choice for individuals and organizations seeking efficient communication solutions in demanding environments.