Holmes HM1850 warranty HOW Cool Mist Works, PRE-OPERATING Instructions, Operating Instructions

Page 3

F E A T U R E S - O P E R A T I O N

HOW COOL MIST WORKS

Your Holmes Cool Mist humidifier draws dry air through the rear air intake grill area. This air is then passed through a moisture–laden wick filter, which retains the minerals and deposits in the water.

The resulting moist air is directed back into the room from the top air grill.

NOTE: This humidification system provides a cool, invisible moisture output. It is normal not to see the mist.

NOTE: A humidity level below 20% can be unhealthy and uncomfortable. The recommended humidity level is between 40%-50%.

PRE-OPERATING INSTRUCTIONS

1.Push the 1 Touch™ button for 2 seconds to turn the unit OFF and disconnect from the electrical outlet.

2.Select a location for your humidifier, on a flat surface, about 4" away from the wall. Do not place your humidifier on furniture; a floor location that will not be damaged by moisture is best.

3.Remove the water tank by holding the tank handle and lifting straight upward (see figure 2).

4.Remove the main housing by lifting straight upward. Check to see that the wick filter is properly in place. Replace the humidifier housing.

FILLING THE WATER TANK

NOTE: This humidifier holds about 2.25 gallons of water in the tank and humidifier base. The humidifier will produce up to 4 gallons of moisture over a 24-Hour period, depending on the room humidity and temperature.

1.Push the 1 Touch™ button for 2 seconds to turn the unit OFF and disconnect from the electrical outlet.

2.Remove the tank from the base by holding the handle and lifting straight up (see figure 2).

3.Twist off the tank cap located on the bottom of the tank by turning counter clockwise and fill the water tank with cool, fresh water.

Do not fill with warm water as this may cause leaking.

4.After filling the tank, replace the tank cap by firmly turning clockwise and then replace the water tank on the base. The tank will immediately begin to empty into the base.

5.Plug the power cord into a 120V AC electrical outlet.

Figure 1

A. CIRCULAR FILTER

SUPPORTS

 

B. CIRCULAR

B

EXTENDED LIFE

FILTER

 

C. HUMIDIFIER

A

BASE

 

C

OPERATING INSTRUCTIONS

Your humidifier is equipped with a technologically advanced 1 Touch™ Electronic Humidistat. You can set the humidifier to run continuously in manual mode or set the 1 Touch™ Electronic Humidistat to your desired temperature setting. The 1 Touch™ Electronic Humidistat will automatically turn the humidifier ON or OFF, depending on

the preset comfort level. The comfort level ranges between 35% and 55% relative humidity.

Manual Mode Instructions:

1.Plug the humidifier into a 120V AC electrical outlet.

2.To start the unit, push the MODE/OFF button once for the HIGH manual setting. (See figure 2.)

3.Press the button again for the LOW manual setting. (See figure 2.)

4.To stop the unit, press and hold the button for two seconds, or keep pressing the button until all the humidity indicators are OFF.

NOTE: In Manual Mode, only the LOW or HIGH power light will be lit.

1 Touch™ Humidistat Instructions

To take advantage of the 1 Touch™ Electronic Humidistat, press the MODE/OFF button until the speed is set in either the HIGH or LOW setting, and the Desired Humidity is set. When the humidity level rises above the set humidity, the humidifier will stop. When the humidity level drops below the set humidity, the humidifier will turn on automatically.

NOTE: When the 1 Touch™ Electronic Humidistat is set, either the HIGH or LOW power light and the percent humidity light will remain lit during operation. (See figure 2.)

NOTE: Allow up to 30 minutes for the filter to fully absorb water and for the unit to produce moisture.

NOTE: The 1 Touch™ Humidifier has memory. This means that when you turn the unit back on, it will be at the last setting the humidifier was set at.

If you do not plan to use the humidifier for two or more days, make sure any residual water is drained from the water tank, base and wick filter to prevent algae or bacteria growth.

Figure 2

A

B

 

 

C

 

 

 

 

H

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

F

 

 

 

 

 

G

A. WATER TANK

D. HUMIDIFIER

F.

FILTER SUPPORT

 

 

 

 

B. CARRY HANDLE

 

HOUSING

G. HUMIDIFIER BASE

C. FILTER CHECK™

E.

1 TOUCH™

H.

1 TOUCH

INDICATOR

 

 

HUMIDISTATHM1850 Exploded View 5/01

 

CONTROL PANEL

Image 3
Contents Cool Mist Humidifier Do not block air inlet or outlet Read all instructions before using the applianceHumidifier should be unplugged when not in use Do not use outdoorsFilling the Water Tank HOW Cool Mist WorksPRE-OPERATING Instructions Operating InstructionsReplacing the Filter Daily MaintenanceWeekly Maintenance P L a C I N G T H E F I L T E RTrouble TroubleshootingReplacement Accessories Solution18/01 last update HM1850 Save this Warranty InformationService Instructions SIX 6 Year Limited Warranty

HM1850 specifications

The Holmes HM1850 is an advanced air purifier that has garnered attention for its impressive features, cutting-edge technologies, and remarkable performance in improving indoor air quality. Designed for homes and small offices, the HM1850 combines functionality with convenience, making it a popular choice among consumers.

At the core of the Holmes HM1850's design is its multi-stage filtration system. The purifier utilizes a True HEPA filter capable of capturing up to 99.97% of airborne particles, including dust, pollen, smoke, and pet dander, down to a size of 0.3 microns. This high level of filtration makes it particularly beneficial for allergy sufferers and individuals with respiratory issues. Additionally, the HM1850 is equipped with a pre-filter that helps capture larger particles, prolonging the life of the HEPA filter and enhancing overall efficiency.

One of the standout features of the HM1850 is its smart sensors that automatically detect air quality levels. The unit adjusts airflow and filtration settings based on the current air quality, optimizing performance while minimizing energy consumption. This feature not only saves energy but also allows for a more user-friendly experience, as users can trust that the device is working efficiently without needing constant supervision.

The HM1850 also includes a built-in air quality indicator, which visually displays the current state of the air in real-time. This intuitive feature helps users gauge the effectiveness of the purifier and understand when it may need to be adjusted or serviced. Furthermore, with its sleek and modern design, the HM1850 seamlessly integrates into various home decor styles without being obtrusive.

Additionally, the Holmes HM1850 operates quietly, making it a suitable option for bedrooms or quiet workspaces. The adjustable fan speeds allow users to choose the level of airflow that best suits their needs, whether they desire maximum purification or a more serene environment.

In conclusion, the Holmes HM1850 stands out in the market due to its combination of advanced filtration technology, smart sensors, user-friendly features, and an aesthetically pleasing design. Its effectiveness in improving indoor air quality makes it a valuable investment for anyone looking to enhance their living or working environment.