Hubbell Electric Heater Company V20, V10 manual Hubbell Electric Heater Company, Stratford, Ct

Page 2

HUBBELL

ELECTRIC HEATER COMPANY

P.O. BOX 288

STRATFORD, CT 06615

PHONE: (203) 378-2659

FAX: (203) 378-3593

INTERNET: http://www.hubbellheaters.com/

-- IMPORTANT --

Always reference the full model number and serial number when calling the factory.

WARNING / CAUTION

1.Tank is to be completely filled with water and all air is to be vented before energizing.

2.Due to the rigors of transportation, all connections should be checked for tightness before heater is placed in operation.

3.Safety relief valve must be installed in tapping provided.

4.The refractory material used in heating elements may absorb some moisture during transit, periods of storage, or when subjected to a humid environment. This moisture absorption results in a cold insulation resistance of less than twenty (20) megohms. If this heater has been subjected to the above condition, each heating element must be checked for insulation resistance before energizing. A low megohm condition can be corrected by removing the terminal hardware and baking the element in an oven at 350°F -700°F for several hours or until the proper megohm reading is obtained.

5.KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.

Do not perform any maintenance, make any adjustments, or replace any components inside the control panel with the high voltage power supply turned on. Under certain circumstances, dangerous potentials may exist even when the power supply is off. To avoid casualties, always turn the power supply safety switch to off, turn the charge or ground the circuit before performing any maintenance or adjustment procedure.

6.The unit is designed to operate at pressure not more than 150 psi.

7.Generalized instructions and procedures cannot anticipate all situations. For this reason, only qualified installers should perform the installations. A qualified installer is a person who has licensed training and a working knowledge of the applicable codes regulation, tools, equipment, and methods necessary for safe installation of an electric resistance water heater. If questions regarding installation arise, check your local plumbing and electrical inspectors for proper procedures and codes. If you cannot obtain the required information, contact the company.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Electric Heater Company Hubbell Electric Heater Company STRATFORD, CTTable of Contents Section Title Page Tank Connections Section I General Description and ConstructionTank Heating ElementMagnetic Contactor Temperature High Limit SwitchControl Thermostat Outer SHELL, INSULATION, and Supports OptionsDial Temperature and Pressure Gauge Special Customized Features Water Heater Placement Piping InstallationElectrical Installation Filling the HeaterFinal Checks Page Page Page Freezing Section III Scheduled Maintenance and OperationMaintenance and Operation Quarterly InspectionAnnual Inspection Section IV Troubleshooting Symptom Probable Cause Corrective Action / RemedyPage Section V Servicing & Replacement of Parts Surface Temperature High Limit CUT-OFFImmersion Temperature High Limit CUT-OFF Heating Element Immersion Thermostat Magnetic Contactor Relief Valve Section VI Miscellaneous Charts and Formulas Element Chart FormulasTorque Values

V20, V10 specifications

Hubbell Electric Heater Company has long been a leader in the manufacturing of high-quality electric heating solutions. Among its standout products are the V10 and V20 series electric heaters, known for their efficiency, reliability, and advanced technology tailored to meet diverse heating needs in both residential and commercial applications.

The V10 series is designed for robust performance and compact versatility. Ideal for smaller spaces or applications where heat is required intermittently, the V10 offers exceptional energy efficiency to reduce operational costs without sacrificing performance. Equipped with a durable metal housing, these heaters can withstand harsh environments while providing consistent warmth. The V10 model typically features adjustable thermostats, allowing users to easily regulate temperatures and maintain comfort levels. Additionally, the compact design makes it easy to install in various locations, including garages, workshops, and even in recreational areas.

Meanwhile, the V20 series takes performance a notch higher, making it suitable for larger spaces where more heat output is necessary. The V20 unit is engineered with advanced heating elements that ensure quick heat-up times and sustained warmth, ensuring spaces are comfortable even in the coldest conditions. This model often incorporates advanced safety features such as overheat protection and thermal cut-off, providing peace of mind for users. Furthermore, the V20 series is built with easy accessibility in mind, allowing for straightforward maintenance and less downtime.

Both the V10 and V20 series are equipped with intelligent control systems that enhance energy efficiency. These systems often include Wi-Fi connectivity, enabling users to monitor and control heater settings remotely through mobile applications. This cutting-edge technology ensures that heating is optimized based on user habits and preferences, potentially leading to significant energy savings.

In summary, Hubbell Electric Heater Company's V10 and V20 series heaters stand out for their reliability, safety features, and energy-saving technologies. Whether for a small room or a large commercial space, these heaters offer flexibility, ease of use, and modern solutions for effective heating. By integrating innovative technologies and user-friendly controls, Hubbell continues to push the boundaries of electric heating solutions, catering to the evolving needs of its customers.
Top Page Image Contents