KRK V6 manual Problem The monitor hisses, hums or makes other loud noises

Page 11

∙Play some non-distorted source material at a low volume. Carefully cover the tweeter (to block the sound) without touching the diaphragm. Is the woofer producing a clean sound? If there is not a clear tonal quality or any sound at all then the woofer probably needs to be replaced.

∙Cover the woofer so you can hear mostly the tweeter. Is the tweeter producing a clear sound? If there is not a clear tonal quality or any sound at all then the tweeter probably needs to be replaced.

∙Once you have a better idea of what may be at fault then call us and speak with someone in the service department. They will help you determine the best solution to correct your monitors. The service department can be reached at (714) 373-4600 ext. # 21.

Problem: The monitor hisses, hums or makes other loud noises...

Here are some suggestions that will help you eliminate these undesirables from your system:

∙Make sure that the power cord is plugged snugly into the IEC socket on the rear of the monitor.

∙Check the connections between the signal source and the monitor. The V6's Neutrik® Combo connector is a completely balanced system. If you're connecting an unbalanced output to the monitor, be sure that you're using PIN 2 for signal and have PIN 1 and PIN 3 tied together at the source end.

∙Refer to the Connecting the System section on page 4 of this manual to ensure that the AC mains is matched to the operating voltage requirements.

∙All audio equipment should use the same ground point. Check all other devices using the same AC output in the building like dimmers, neon signs, TV screens, and computer monitors. These devices should not be using the same circuit.

For updated Troubleshooting information please visit our Web Site www.krksys.com.

Please read the warranty card that was included in the shipping carton of your monitor prior to shipping it back to KRK Systems, Inc. All products in need of repair can be returned to the dealer where it was purchased or to KRK Systems, Inc. at the following address:

KRK SYSTEMS, INC.

5452 BUSINESS DRIVE HUNTINGTON BEACH, CA 92649 (714) 373-4600

ATTENTION: SERVICE DEPARTMENT

∙For the safest possible return to KRK, please use the shipping carton and packaging that your V6 was originally shipped in.

∙KRK cannot be responsible for any damages incurred during the shipping process due to poor packing. Make sure to insure your shipment.

∙If your monitor is out of warranty and you would like a quotation prior to servicing your product, please include a note with your contact information on it and we will contact you with a service quote. Service will be performed once your method of payment has been established and approved.

∙Replacement carton and packaging can be purchased from KRK Systems, Inc. for $18.00 each.

∙For replacement part quotes call (714) 373-4600 ext. #21.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents E R G U I D E Introduction ContentsSystem Control Connecting Your SystemChannel SET-UP Installing Your MonitorsNeutrik Combo Connector Positioning Your MonitorsSubwoofer SET-UP Page Channel Surround SET-UP When transporting or shipping your System Highlights Design GoalsProblem If there is no power, check to see if TroubleshootingProblem The monitor hisses, hums or makes other loud noises Page V6 Powered Studio Monitor SpecificationsKRK and V6 are registered trademarks of KRK Systems, Inc SafetyInstructions English Explanation of graphical symbols Avertissement ConsignesdeSecuriteFrancaisExplication des symboles graphiques

V6 specifications

The KRK V6 is a prominent studio monitor that combines innovation and acoustic expertise, designed to meet the needs of musicians, producers, and audio engineers. Leveraging KRK's renowned reputation for quality sound reproduction, the V6 stands out with its impressive features and advanced technologies, making it an ideal choice for professional and home studios alike.

One of the standout features of the KRK V6 is its bi-amped design, which incorporates separate amplifiers for the woofer and tweeter, allowing for improved audio clarity and dynamic range. The low-end is powered by a 6.5-inch Kevlar woofer, which ensures a tight and accurate bass response, while the 1-inch tweeter delivers smooth, detailed highs. This combination allows for a well-balanced sound profile that translates well across various playback systems.

KRK’s signature front-firing bass port facilitates low-frequency response without boundary coupling, which is crucial for maintaining accuracy during mixing. This innovative design helps in reducing unwanted resonances that can distort the sound, ensuring a cleaner listening experience. The V6 also incorporates KRK's proprietary DSP-driven room tuning technology, which allows users to adapt the monitor’s response to their specific listening environment. This feature includes adjustable EQ settings that help tailor the sound to compensate for acoustic anomalies in the room.

In terms of build quality, the V6 features a sleek, modern design that not only looks impressive but is also optimized for sound performance. Its robust enclosure minimizes resonance and prevents unwanted coloration of sound, further allowing for an accurate mixing experience.

The KRK V6 is equipped with balanced XLR and TRS inputs, providing versatile connectivity options suitable for various studio setups. This versatility makes it easier for audio professionals to integrate the monitor into any existing system seamlessly.

Overall, the KRK V6 is an exceptional studio monitor that delivers high-quality sound reproduction, advanced room correction technologies, and flexible connectivity. Whether you’re mixing tracks, producing music, or simply enjoying your favorite tunes, the KRK V6 promises a listening experience that is both precise and enjoyable, making it a valuable addition to any audio setup.
Top Page Image Contents