Hubbell Electric Heater Company SE Section III Scheduled Maintenance and Operation, Freezing

Page 12

SECTION III - SCHEDULED MAINTENANCE AND OPERATION

WARNING / CAUTION

Before performing any maintenance procedure, make certain power supply is OFF and cannot accidentally be turned on.

MAINTENANCE AND OPERATION

The water heater is automatic in its operation. It will maintain a full tank of water at the temperature setting of the thermostat. The water heater should not be turned on without first making sure that the tank is full of water and that all air has been released.

FREEZING

The tank should be fully drained in the event the electricity has been turned off and if there is danger of freezing.

QUARTERLY INSPECTION

1.Monitor thermostat

a.Let water heater completely heat to a designated thermostat setting.

b.After thermostat satisfies (that is, when the thermostat actually clicks off), draw water from heater.

c.Compare water temperature of drawn water to the temperature setting of the thermostat when it satisfies. Normal variation between the two points is approximately + 5°F.

d.If these two readings do not coincide within acceptable tolerances and verification has been made of the accuracy of the temperature-reading gauge, replace the thermostat.

2.Lift test lever on relief valve and let water run through valve for a period of approximately 10 seconds. This will help flush away any sediment that might build up in water passageways.

3.Inspect element flange for leakage as follows:

a.Shut off Power Supply.

b.Remove element housing cover.

c. Visually inspect heating element gasket for evidence of leaks.

d.Rub finger around gasket that is between the heating element and tank flange for any evidence of moisture. If moisture is present or a water drip is observed, follow procedure outlined in Section V.

4.Check for loose electrical connections. Tighten as necessary.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Electric Heater Company Hubbell Electric Heater Company BOXSTRATFORD, CT Table of Contents Section Title Page Section I General Description and Construction TankTank Connections Heating ElementTemperature High Limit Switch Control ThermostatMagnetic Contactor Outer Shell and InsulationOptions Low Water Cut-OffDial Temperature and Pressure Gauge Fused Low Voltage TransformerVacuum Relief Valve On/Off Switch Electro-Mechanical TimerIndividually Fused Elements Built-in Circuit BreakerWater Heater Placement Piping InstallationElectrical Installation Filling the HeaterFinal Checks Section III Scheduled Maintenance and Operation Maintenance and OperationFreezing Quarterly InspectionAnnual Inspection Section IV Troubleshooting Symptom Probable Cause Corrective Action / RemedyPage Section V Servicing & Replacement of Parts Surface Temperature High Limit CUT-OFFImmersion Temperature High Limit CUT-OFF Heating Element Page Surface Mounted Thermostat Immersion Thermostat Magnetic Contactor Relief Valve Section VI Miscellaneous Charts and Formulas Element Chart FormulasTorque Values

SE specifications

Hubbell Electric Heater Company SE has established itself as a prominent manufacturer and supplier of electric heating solutions, offering a diverse range of products tailored to meet various industrial, commercial, and residential needs. Founded on a commitment to quality and innovation, Hubbell Electric has been an industry leader for decades, providing reliable and efficient heating systems that ensure optimal performance in various environments.

One of the main features of Hubbell Electric heaters is their versatility. The company offers an extensive selection of products, including unit heaters, duct heaters, and infrared heaters, which cater to different applications across sectors like manufacturing, warehousing, and even residential heating. Each product line is designed to provide efficient heat while minimizing energy consumption, making them an eco-friendly choice for businesses and homeowners alike.

Hubbell Electric also places a strong emphasis on innovative technologies. Their heaters are often equipped with state-of-the-art thermal management systems, which regulate temperature and prevent overheating, thereby extending the lifespan of the units. In addition, many of their products feature advanced controls, allowing for seamless integration with existing building management systems. This capability not only enhances operational efficiency but also enables users to monitor and manage their heating systems remotely.

Another characteristic that sets Hubbell Electric apart is their commitment to safety. All their products comply with the latest industry standards and regulations to ensure safe operation. Many models come with built-in safety features, such as over-temperature protection and automatic shut-off, which provide peace of mind for users.

Hubbell Electric also prioritizes user convenience and ease of installation. Their heaters are designed with user-friendly features that simplify the installation process and minimize maintenance requirements. This focus on practicality ensures that customers can have their heating systems operational quickly and with minimal hassle.

Moreover, Hubbell Electric Heater Company SE prides itself on exceptional customer support and service. They offer extensive resources, including installation guides and product specifications, as well as a dedicated customer service team to assist clients with their specific needs and challenges.

In summary, Hubbell Electric Heater Company SE combines versatility, advanced technologies, safety, user-friendliness, and outstanding customer support to provide high-quality electric heating solutions that cater to a wide range of applications. By continually innovating and adhering to stringent safety standards, the company remains a trusted choice for customers seeking reliable heating solutions.
Top Page Image Contents