Hubbell Electric Heater Company CE110 specs

WARNING / CAUTION

1.Please read all instructions prior to installing water heater.

2.Tank is to be completely filled with water and all air is to be vented before energizing.

3.Due to the rigors of transportation, all connections should be checked for tightness before heater is placed in operation.

4.Safety relief valve must be installed in tapping provided.

5.The refractory material used in heating elements may absorb some moisture during transit, periods of storage, or when subjected to a humid environment. This moisture absorption results in a cold insulation resistance of less than twenty (20) megohms. If this heater has been subjected to the above condition, each heating element must be checked for insulation resistance before energizing. A low megohm condition can be corrected by removing the terminal hardware and baking the element in an oven at 350°F -700°F for several hours or until the proper megohm reading is obtained.

6.KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.

Do not perform any maintenance, make any adjustments, or replace any components inside the control panel with the high voltage power supply turned on. Under certain circumstances, dangerous potentials may exist even when the power supply is off. To avoid casualties, always turn the power supply safety switch to off, turn the charge or ground the circuit before performing any maintenance or adjustment procedure.

7.This appliance is designed to store water heated only by the electrical elements provided, at temperature of not more then 125°F and pressures of not more than 150 psi. Heat input from any external or additional source will void the warranty.

8.The design anticipates the proper installation and care in use of the product. There is a risk of property damage and personal injury inherent in these of any hot water system. The Company cannot supervise the installation and therefore make it a specific condition of the warranty that the customer will supervise the installation and use of this product to be sure they are performed in accordance with safe guidelines and proper local or national codes. Generalized instructions and procedures cannot anticipate all situations. For this reason, only qualified installers should perform the installations. A qualified installer is a person who has licensed training and a working knowledge of the applicable codes regulation, tools, equipment, and methods necessary for safe installation of an electric resistance water heater. If questions regarding installation arise, check your local plumbing and electrical inspectors for proper procedures and codes. If you cannot obtain the required information, contact the company.

CE110 specifications

The Hubbell Electric Heater Company CE110 is a leading solution in the realm of electric heating systems, offering reliable performance for various applications. This compact and efficient space heater is designed for both residential and commercial spaces, making it a versatile choice for consumers.

One of the standout features of the CE110 is its robust heating capacity. With a power output of 1,000 watts, it is capable of effectively warming small to medium-sized rooms, providing instant comfort when needed. This heater operates on a standard 120-volt power supply, making it compatible with most electrical systems, which simplifies installation.

The CE110 employs advanced heating technologies that enhance its efficiency. It features a durable heating element that allows for quick heat-up times, ensuring that users do not have to wait long to feel the effects of the warmth. Additionally, the heater is equipped with a built-in thermostat, allowing users to set their desired temperature and maintain a consistent and comfortable environment.

Safety is a paramount concern with electric heaters, and the Hubbell CE110 does not disappoint. It comes with a range of safety features, including over-temperature protection, which automatically shuts off the heater if it gets too hot. This ensures peace of mind for users, minimizing the risk of overheating or potential fire hazards. Furthermore, the heater is designed with a sturdy, high-quality construction that can withstand daily use.

Aesthetically, the CE110 has a sleek and modern design that fits seamlessly into various interior decorations. Its neutral color scheme allows it to blend into any setting without being an eyesore. Additionally, its compact dimensions mean it can be placed in tight spaces without a problem, making it a convenient choice for those with limited room.

Another key characteristic of the CE110 is its low-maintenance requirement. The unit is designed for long-term durability, reducing the need for frequent repairs or replacements. This reliability adds value for users looking for an electric heater that offers both performance and longevity.

In summary, the Hubbell Electric Heater Company CE110 combines efficient heating capabilities with advanced safety features and a compact design, making it an excellent choice for anyone seeking a reliable electric heater for their home or office. Its easy installation and user-friendly thermostat make it accessible for all users, while its durability assures long-lasting comfort.