Empire Comfort Systems LS-18B2-1 Birch LOG Placement, All Logs, Log Placement LS-18,24,30B2-1

Page 5

BIRCH LOG PLACEMENT

Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling logs, wash your hands gently with soap and water.

All Logs

The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance.

Refer to Figure 1 and Figure 1A for the following warning.

Warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.

PROPER INSTALLATION SEQUENCE: LS-(18,24,30)B2-1:

(Figure 1)

1.Place rear (#1) log onto two (2) pins on rear log support.

2.Place left, front (#2) log onto two (2) left, front pins on burner pan.

3.Place right, front (#3) log onto two (2) right, front pins on burner pan.

4.Place Y Branch (#4) onto two (2) pins on rear log.

5.Compare the completed log installation with the appropriate photo from pages 7 through 9. Review previous steps to make any necessary adjustments.

6.Log placement is completed.

Replacement Loose Material (glowing embers) Part Number

LS-18B

15999

LS-24B

15970

LS-30B

15970

Platinum Bright Embers

PE-20-1

Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner.

4

1

3

2

Log Placement LS-(18,24,30)B2-1

Figure 1

The following WARNING applies when log set is installed onto an unvented gas burner assembly.

WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted.

21088-2-0706

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Instructions Table of Contents Important Installation Guidelines General Information Qualified Installing AgencyReplacement Loose Material glowing embers Part Number Birch LOG PlacementLog Placement LS-18,24,30B2-1 All LogsEmber Placement LS-18B2 Photos Ember Placement LS-24B2 Photos With Photo Ember Placement LS-30B2 PhotosHOW to Order Repair Parts Birch Parts List & Parts ViewLS-18B2 LS-24B221088-2-0706 21088-2-0706

LS-24B2-1, LS-30B2-1, LS-18B2-1 specifications

Empire Comfort Systems has long been a trusted name in the heating industry, delivering innovative and efficient products that cater to a variety of residential and commercial needs. Among their notable offerings are the LS-24B2-1, LS-30B2-1, and LS-18B2-1 vent-free gas log heaters. Each model is designed to provide reliable warmth while maximizing comfort and efficiency.

The LS-24B2-1 model boasts a maximum output of 24,000 BTUs, making it suitable for spaces needing substantial heat. Its vent-free design eliminates the need for chimneys or flues, allowing for easy installation in virtually any room. This model features a realistic flame presentation with a ceramic fiber log set that mimics the look of a traditional wood-burning fire. Additionally, the adjustable height steel burner provides customizable heat output and enhances the overall efficiency of the unit.

Moving on to the LS-30B2-1, this heater is the most powerful of the three, offering up to 30,000 BTUs. Its impressive capacity makes it ideal for larger areas, ensuring that every corner of the room is adequately warmed. The LS-30B2-1 also shares the vent-free technology common to Empire's offerings, simplifying installation and reducing operational costs. Furthermore, it includes advanced safety features such as an Oxygen Depletion Sensor (ODS) that automatically shuts off the unit if oxygen levels fall below safe thresholds.

Lastly, the LS-18B2-1 model is designed for smaller spaces, providing a maximum output of 18,000 BTUs. This model is perfect for cozy living rooms or bedrooms, delivering warmth without taking up much space. Like its counterparts, it features a beautiful ceramic log set and a durable construction that ensures longevity and reliability.

All three models are equipped with adjustable heat settings and come with millivolt control, allowing users to operate the units even during power outages. The efficiency of these heaters is further enhanced by their low emissions, allowing for clean combustion and compliance with environmental standards.

In summary, the Empire Comfort Systems LS-24B2-1, LS-30B2-1, and LS-18B2-1 gas log heaters combine powerful heating capabilities with safety and efficiency. Their vent-free design, realistic flame effects, and user-friendly controls make them a valuable addition to any home looking for warmth and comfort. Whether in a spacious living area or a small room, these heaters provide reliable solutions to meet diverse heating needs.
Top Page Image Contents