Homelite HH55, HH35A Assembly, Fuels, Ventilation, For 110,000 and 150,000 BTU/ Hr Models Only

Page 4

PORTABLE SPACE HEATER

ASSEMBLY

(For 110,000 and 150,000 BTU/ Hr Models Only)

These models are furnished with wheels and a front handle. Wheels, handle, and the mounting hardware are found in the ship- ping carton.

Tools Needed

Medium Phillips Screwdriver

3/8" Open or Adjustable Wrench

Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: When installing wheels, point extended hub of wheels toward wheel support frame (see Figure 3).

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel sup- port frame.

4.Place front handle on top of fuel tank flange. Insert screws through handle(s), fuel tank flange, and wheel support frame. Attach nut finger tight after each screw is inserted.

5.After all screws are inserted, tighten nuts firmly.

FUELS

WARNING: Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gaso- line, naphtha, paint thinners, al- cohol, or other highly flammable fuels.

Do not use heavy fuels such as No. 2 fuel oil or No. 2 Diesel. Using heavy fuels will result in:

clogged fuel filter and nozzle

carbon build-up on spark plug

the need of non-toxic anti-icer in fuel during very cold weather

IMPORTANT: Use a KEROSENE ONLY storage container. Be sure storage container is clean. Foreign matter such as rust, dirt, or

Front

Handle

Screw

water will cause the flame-out control to shut down heater. Foreign matter may also require you to clean fuel system often.

Hot Air

Outlet

Fuel

Air

Inlet

Tank

 

Flange

 

Wheel

Support

Frame

Wheel

 

Nut

 

Cap Nut

 

Extended

 

Axle

Hub

 

 

Figure 3 - Wheel and Handle Assembly, 110/150,000 BTU/Hr Models Only

VENTILATION

WARNING: Follow the mini- mum fresh, outside air ventila- tion requirements. If proper fresh, outside air ventilation is not pro- vided, carbon monoxide poison- ing can occur. Provide proper fresh, outside air ventilation be- fore running heater.

Provide a fresh air opening of at least three square feet for each 100,000 BTU/Hr rat- ing. Provide extra fresh air if more heaters are being used.

Example: A 150,000 BTU/Hr heater re- quires one of the following:

a two-car garage door raised six inches

a single-car garage door raised nine inches

two thirty-inch windows raised twelve inches

4

100507

Image 4
Contents Portable Space Heaters Safety Information Portable Space HeaterProduct Identification UnpackingAssembly FuelsVentilation For 110,000 and 150,000 BTU/ Hr Models OnlyTheory Operation To Start HeaterTo Stop Heater To Restart HeaterPreventative Maintenance Storing TRANSPORTING, or ShippingSchedule How Often How ToTroubleshooting See Pump Pressure Adjustment,Service Procedures Upper Shell RemovalFAN AIR OUTPUT, AIR INTAKE, and Lint FiltersFuel Filter Pump Pressure Adjustment35/55/110/150,000 BTU/Hr Models Service Attach spark plug wire to spark plugSpark Plug 35/55,000 BTU/Hr ModelsNozzle 110/150,000 BTU/Hr ModelsPump Rotor Procedure if rotor is bindingRemoval, Specifications Wiring DiagramsAccessories AIR Gauge KIT100507 Inc

HH55, HH110 & HH150A, HH35A specifications

The Homelite HH110 and HH150A chainsaws, along with the HH55 and HH35A models, are notable products in Homelite's lineup, known for their reliability and performance in various cutting tasks. Each model has specific features and technologies that make them suitable for different user needs.

The Homelite HH110 is a robust chainsaw powered by a durable 110cc engine, providing ample power for both professional and heavy-duty home use. It features a lightweight design, which allows extended use without excessive fatigue. The HH110 is equipped with an automatic chain oiler, ensuring consistent lubrication during operation, thereby prolonging the life of the chain and the bar.

In contrast, the Homelite HH150A offers a lower displacement engine at 150cc, making it an ideal choice for homeowners or those needing a manageable yet powerful tool. It comes with features such as a primer bulb for easier starting and a tool-less chain tensioning system, which allows for quick adjustments without the need for additional tools. This model is celebrated for its user-friendly design.

The HH55 chainsaw has historically been a classic model, cherished for its reliability during the mid-range power segment with its effective 55cc engine. It maintains a balance between power and lightweight construction. This chainsaw is often favored by users who require a dependable tool for moderate cutting tasks, making it suitable for both occasional users and professionals who require efficient performance.

On the smaller side, the HH35A is characterized by its compact design and lighter weight, featuring a 35cc engine. This model is perfect for less intensive tasks such as pruning or trimming. Its ergonomic design and excellent maneuverability make it appealing to new users or those looking for a dependable tool for maintaining their yard.

All these models feature advanced technologies like anti-vibration systems, which help reduce fatigue during use, and easy-access air filters for straightforward maintenance. The Homelite chainsaws also employ efficient fuel systems that optimize performance and reduce emissions, aligning with modern environmental standards. With a variety of models available, Homelite offers options for every user, ranging from the powerful HH110 to the compact HH35A, ensuring there’s a suitable chainsaw for every cutting need.