Samsung SSA-P400 Important Safety Instructions, This device may not cause harmful interference

Page 3

5.Keep out of direct sunlight and heat radiation sources. It may cause fire.

6.Install it in a place with good ventilation.

7.Avoid aiming the controller directly towards extremely bright objects such as sun.

8.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1)This device may not cause harmful interference, and

2)This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac- cordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus.

13. Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAFETY INFORMATION

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Please visit our website Access Control PanelSafety information Safety informationThis device may not cause harmful interference, Important Safety InstructionsContents Product introduction FeaturesHoliday Setup Input Port Format SetupDoor Open Alarm and Forced Door Open Alarm SettingsWHAT’S Included Main UnitCD Manual Address Setup 5V for any output occurrence Switch Board ID SetupSwitch Switch System after the initialization Output Relay #1 ~Buzzer control settings IndicatoradditionallyInput LED Indicator Signal occursBoard Connector used to connect to the main boardInput port #11 Input port #8Input port #9 Input port #10Host P.C Cable SelectionTermination Resistor in RS-485 Communication Connecting the Termination Resistor and DiodeTermination Resistor Bypass Diode ConnectionEARTH-GROUNDING the Communication Cables Installation and external connectionPOWER, READER, and I/O Connection Power ConnectionReader Connection Input Connection DC +12V GND Output ConnectionCommunication Line Connection RS-232 Communication Port ConnectionCheck the location of the communication port RX+ RS-422 Communication Port Connection StandaloneTX+ RX+ RS-422 Communication Port Connection Multiple UnitsTCP/IP Communication Port Connection TCP/IP Communication ConfigurationTCP/IP Connection System Initialization Initializing the system using the Initialize switchSwitches simultaneously InitializationYou can specify between 0 and 255 for the board ID Board ID SettingTroubleshooting TroubleshootingAction No communication is available When the system is in sync withProduct specifications Product SpecificationsCorrect disposal of batteries in this product

SSA-P400, SSA-P400T, SSA-P401T, SSA-P401 specifications

Samsung has established itself as a leader in the technology market, consistently pushing the boundaries of innovation and performance. Among its latest offerings are the SSA-P401T, SSA-P400T, SSA-P400, and SSA-P401 models, a series of products designed to elevate user experiences across various applications. These models, while similar in many respects, each bring unique features tailored to different audience needs.

The SSA-P401T is equipped with advanced technology to ensure superior performance and reliability. Featuring a high-definition display and cutting-edge image processing capabilities, it provides crisp visuals and vibrant colors, making it ideal for presentations and multimedia applications. This model is particularly noted for its ability to handle high-resolution content seamlessly, ensuring that viewers enjoy an immersive experience.

The SSA-P400T, on the other hand, is focused on versatility and usability. Its robust build and sleek design make it an excellent fit for both professional and educational environments. This model integrates various connectivity options, allowing users to connect multiple devices easily. The intuitive user interface further enhances accessibility, ensuring that even those with limited technical expertise can operate it with ease.

In the SSA-P400, Samsung emphasizes efficiency and energy-saving technologies. This model is designed for extended use, minimizing power consumption without compromising performance. It incorporates smart features that adjust the display settings based on the surrounding environment, thus providing optimal viewing conditions while reducing energy waste.

Lastly, the SSA-P401 stands out for its extensive customization options, allowing users to tailor the settings according to their specific needs. This model is particularly appealing for businesses that require adaptability in their visual displays. With advanced audio-visual technologies, including enhanced sound processing and compatibility with various multimedia formats, the SSA-P401 is well-suited for dynamic presentations and content streaming.

Overall, the Samsung SSA-P401T, SSA-P400T, SSA-P400, and SSA-P401 models each bring their unique advantages to the table. Whether it’s the immersive visuals of the SSA-P401T, the versatility of the SSA-P400T, the energy efficiency of the SSA-P400, or the customization of the SSA-P401, these products demonstrate Samsung’s commitment to innovation and quality in every aspect of technology. They are designed to meet diverse user needs, making them valuable additions to any professional or educational setting.
Top Page Image Contents