Hustler Turf M1 owner manual Operation, Preparation and inspection, Engine operation

Page 18

Operation

WARNING: Before inspection, stop the engine and remove the spark plug wire from the spark plug.

A.Preparation and inspection

1.Place the mower on a level surface.

2.Check the engine oil level using the engine oil dip- stick. Do not screw dipstick into tube when checking engine oil. Make sure the oil level is between the upper and lower limits on the dipstick. Replenish oil if necessary. Make sure the dipstick is properly seated when reinstalled in the dipstick housing. Fig. 4-18

3.Check the fuel level and fill fuel tank if necessary. Make sure the fuel cap is screwed on properly and tight before beginning operation. Fig. 4-19

4.If catching: Check the grass bag for any holes or damage. Replace if damaged.

If mulching: Check that the spacer, stand/stopper and plug are in place and the guard is in the lowest position and is resting against the plug.

5.Check the machine for loose hardware or parts. Make sure all covers and guards are properly installed.

6.Check the mower blade for damage and proper blade bolt torque. Replace blade if damaged. Refer to Mower Blade Maintenance section for more detailed information.

Dipstick

Fig. 4-18

Fuel cap

Fig. 4-19

B.Checking the Blade Brake Clutch safety system

Check the blade brake clutch safety system daily, prior to each use. This system is an important mower safety feature. It should be repaired immediately if it malfunctions.

1.Stop the engine and wait for all moving parts to stop.

2.Move the mower onto a paved surface that is located in a non-windy area.

3.Set the cutting height to 2-1/2” (6.4cm) at all four wheels.

4.Crumple a half sheet of newspaper into a ball small enough to go under the deck (approximately 3” or 7.6cm in diameter).

5.Place the newspaper ball 5” (12.7cm) in front of the mower.

6.Start the engine.

7.Engage the blade lever to start the blade.

8.After the blade is spinning, disengage the blade lever. You should hear a change in the noise the mower is making. This will be due to the blade stopping and the engine sound increasing because no load is being applied to it.

9.Immediately push the mower over the newspaper ball.

10.Stop the engine and wait for all moving parts to stop.

11.Walk around the mower to check for the newspaper ball. If the ball did not go under the mower then repeat steps 5 through 10.

12.Move the mower away from the newspaper ball. If the newspaper ball has unraveled or is shredded, the blade is not stopping properly, resulting in unsafe operating conditions. Contact your Hustler Turf Dealer before continuing operation.

C.Engine operation

1.Attach the spark plug wire to the spark plug.

2.Set the fuel cock to the “ON” (open) position. Fig. 4-20

ON

Fig. 4-20

3.Set the throttle to the “CHOKE” position if starting a cold engine. Set the throttle to the “FAST” position if the engine is warm. Fig. 4-21

Throttle lever

(choke position)

Fig. 4-21

4.To start the engine: Lightly pull on the starter rope handle until you can feel resistance. Make sure you have a good grip on the handle and then pull on the starter rope handle with more force. After engine has started allow the starter rope to return to the recoil starter handle slowly.

4-8

108548_0711

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 1085480711 Page Table of Contents 1085480711 General Information 1085480711 What is Covered by this Warranty Time Limit Safety Precautions Safety and Instruction DecalsOperating Operation Precautions OperationSafe Operating Practices Slope Operation ChildrenAssembly Parts ListPage Mulch kit DescriptionTorque blades to 26 33 ft.-lb -45 Nm. Fig Name Description Operation Preparation and inspectionEngine operation Mowing operation Cutting height adjustment To shutdown the mower do the followingGrass catcher Transporting the mower 1085480711 Safe Servicing Practices Maintenance & AdjustmentsService IntroductionFuel system Torque valuesWashing the mower Engine oil and filterChecking the blade Replacing the bladeThrottle lever adjustment Blade lever adjustmentDrive clutch lever Gearshift lever Troubleshooting Hustler M-1 Maintenance ScheduleStorage Preparation of engine for storageNew season preparation 1085480711 Parts Manual 1085480711 General Information Mower Deck Assembly Mower Deck Assy Wheel Breakdown Wheel Assembly Includes Items Brake Assembly Service Part Cover Unit Service Gear Case-71008-431 Gear Case Mulch Kit Plug Handle, Levers & Catcher System Handle Lower Decals Decal SET, Kaaz Deck includes item numbers 1085480711 Index 61002-162 6-9 Mower blade maintenance New season preparation Page 1085480711

M1 specifications

The Hustler Turf M1 is an innovative robotic mower designed to revolutionize lawn care for homeowners and professionals alike. Engineered with cutting-edge technology, this smart machine stands out by providing efficiency and ease of use while achieving a beautifully manicured lawn.

One of the hallmark features of the Hustler Turf M1 is its superior cutting performance. Equipped with a robust cutting deck, the M1 is capable of handling various grass types and lengths, ensuring a consistent and even cut. The adjustable cutting height allows users to tailor the mower's performance to suit specific lawn needs, promoting healthy grass growth and maintaining aesthetically pleasing landscapes.

A standout technology in the M1 is its advanced navigation system. Utilizing GPS and intricate mapping capabilities, the mower intelligently maneuvers around obstacles, ensuring thorough coverage without damaging plants or garden fixtures. This precision is further enhanced by the mower's ability to learn the layout of your yard over time, adapting its mowing patterns to become even more efficient.

The Hustler Turf M1 is also built for convenience. Its user-friendly interface allows homeowners to program mowing schedules with ease, while the mobile app enhances overall control, enabling users to manage mowing from their smartphones. This remote management feature empowers owners to oversee their mower's activity and make adjustments without stepping outside.

Another significant characteristic is its durability. Constructed with high-quality materials, the M1 is designed to withstand various weather conditions and resist wear and tear, ensuring longevity. The mower's design also incorporates safety features like obstacle detection and automatic shut-off to prevent accidents, ensuring peace of mind for users.

The Hustler Turf M1 is environmentally friendly as well. Its electric charging system reduces carbon emissions, and with a quiet operation, it’s perfect for residential areas without causing disturbances. This sustainable approach allows users to maintain their lawns with minimal environmental impact.

In summary, the Hustler Turf M1 combines advanced features, innovative technologies, and durable construction to simplify lawn care. With its remarkable cutting performance, intelligent navigation, user-friendly interface, and eco-conscious design, the M1 is indeed a game-changer in the realm of robotic mowers, catering to the needs of modern homeowners seeking efficiency and excellence in lawn maintenance.
Top Page Image Contents