Indication for USE, II. General Information

I.INDICATION FOR USE

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for use in the mitigation, treatment, or prevention of any disease or condition.

II.GENERAL INFORMATION

There are different size units available, depending on the square footage of your home. See chart below for determining your homes needs.

	Minimum										Max Air	Lamp Intensity at 1		Recommended
	Minimum
Model	Duct		Volts		Amps		Hz		Watts
Model	Duct		Volts		Amps		Hz		Watts		Temp °F	meter		Max Sq. Feet
	Width										Temp °F	meter		Max Sq. Feet
	Width

UV-12C	9	120		0.5		60		30		190°		37 μW/cm2	1500
UV-18C	14	120		0.5		60		30		190°		73 μW/cm2	2000
UV-28C	22	120		1.1		60		60		150°		105 μW/cm2	3000
UV-28	22	120		1.1		60		60		150°		105 μW/cm2	3000
UV-12HP	9	240		0.5		60		30		190°		37 μW/cm2	1500
UV-18HP	14	240		0.5		60		30		190°		73 μW/cm2	2000
UV-28HP	22	240		1.1		60		60		150°		105 μW/cm2	3000
UV-12HPC	9	240		0.5		60		60		190°		37 μW/cm2	1500
UV-18HPC	14	240		0.5		60		30		190°		73 μW/cm2	2000
UV-28HPC	22	240		1.1		60		30		150°		105 μW/cm2	3000

The UV-12C,18C,28C,12HPC,18HPC, and 28HPC units are equipped with a circuit board to monitor the operation of the UV lamp; it indicates the operation of the lamp through an LED indicator light mounted on the cover of the unit. The circuit board indicates good operation of the lamp by a continuous “GREEN” color on the LED light. After 8,320 hours of lamp operation, the circuit board indicates the elapsed time of lamp operation by a continuous “YELLOW” color on the LED light and the internal alarm will beep every 15 minutes. After 9,000 hours of lamp operation, the circuit board indicates the elapsed time of lamp operation by a continuous “RED” color on the LED light and the internal alarm will beep every 5 minutes. The board also checks if the UV lamp is burned out. If the lamp is burned out, the circuit board will indicate this by a continuous “RED” color on the LED and the internal alarm will beep every 5 minutes.

WARNING: Before installing or servicing a humidifier, air filter, heat system, or this unit, etc., always turn all power OFF and have unit unplugged. Electrical shock can cause personal injury or death. Never expose eyes or skin to direct UVC light from any source.

WARNING: To prevent water damage or electric shock, do not mount unit under a humidifier.

WARNING: Designed for a closed duct system. Do not mount near a supply or a return air opening.

WARNING: This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.). For use on gas fired, oil fired, electric and split system heat pump forced air systems*. This product is NOT designed to be mounted outside on gas fired or heat pump packaged units**.

*Split system heat pumps are systems where the air handler and the air conditioning compressor are separate units.

**Packaged units are systems where the air handler and the air conditioning compressor are built together and are installed outside of the building

WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness. Never operate the UV-Aire™ Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your

hands.

Page 2

UV-18HP, UV-28C, UV-12C, UV-18C, UV-18HPC specifications

Field Controls is a trusted name in indoor air quality solutions, and their lineup of ultraviolet (UV) air purification systems demonstrates a commitment to enhancing health and safety in residential and commercial environments. Among their products, the UV-28C, UV-28HP, UV-28, and UV-12HPC models stand out for their innovative technologies and features designed to promote cleaner air.

The UV-28C is engineered to provide superior air disinfection using a 28-watt UV-C lamp, which effectively targets airborne pathogens, including bacteria, viruses, and mold spores. This unit is designed for easy installation in HVAC systems, allowing it to operate continuously, ensuring that air is treated as it circulates through the system. One of its key features is the ability to operate quietly, making it suitable for residential areas.

The UV-28HP model boasts high-performance capabilities, specifically designed for larger spaces needing enhanced air purification. It includes a more powerful integrated UV lamp that produces more germicidal UV-C light, enabling it to disinfect larger volumes of air more effectively. The UV-28HP also features advanced UV monitoring technology, providing real-time feedback on lamp performance and system efficiency, allowing for proactive maintenance.

Next in the lineup is the UV-28, delivering excellent disinfection while maintaining energy efficiency. This model is equipped with a durable housing, making it robust and dependable over time. The UV-28 uses a unique technology that enables it to maximize UV exposure, allowing microorganisms to be effectively neutralized with minimal energy consumption.

For those seeking a specialized solution, the UV-12HPC offers high-performance capabilities tailored for specific applications. Its compact design allows for flexibility in placement without sacrificing performance. Equipped with a powerful UV lamp, the UV-12HPC excels in smaller systems where space is limited but effective air purification is still needed.

Lastly, the UV-28HPC provides a combination of features from the other models while ensuring high efficiency and reliability. It integrates innovative technologies such as enhanced UV intensity and a compact design suitable for various environments.

In summary, the Field Controls UV-28C, UV-28HP, UV-28, UV-12HPC, and UV-28HPC models exemplify advanced air purification technology, focusing on efficiency, effectiveness, and ease of use. With their unique features, these systems are pivotal in maintaining healthy indoor air quality, ensuring the well-being of occupants in any setting.