Field Controls UV-500C installation instructions VII. Replacement Parts KIT, Limited Warranty

Page 4

3.Disconnect the lamp connection, then rotate lamp-mounting knob counter-clockwise and pull the lamp out of the unit. (See Figure 10 & 11)

4.Remove lamp carefully, by un-plugging the lamp from the lamp-mounting knob. (See Figure 12)

NOTE: When replacing the lamp, always wipe off lamp with the supplied alcohol wipe before installing.

5.Plug the new lamp onto the lamp-mounting knob. (See Figure 12)

6.Guide the other end of the lamp through the hole in the UV chamber. (See Figure 11)

7.Secure the lamp into position by rotating the lamp-mounting knob clockwise.

8.Plug the lamp power leads back into the power connection. (See Figure 10)

NOTE: UV lamps contain a small amount of mercury, like a typical fluorescent lamp. According to the EPA’s Universal Waste Rule, these types of lamps may be disposed of into household waste. Check with your local waste management authority for local disposal or recycling requirements.

9.Close the access door and install the access door screw. (See Figure 8)

10.Plug the power cord back into the wall receptacle or restore power to the UV-500C.

11.Use the point of a pen or paper clip to press the “reset” button beside the lamp LED. (See Figure 13)

12.Lamp LED will turn from “RED” to “GREEN” and the display will say “LAMP: 365 DAYS”.

REPLACING AIR FILTERS

1.Pull the drawer out at the base of the unit and remove the old filter.

2.Remove the filter from its plastic bag and place the filter into the tray of the drawer with the black carbon facing up.

3.Use the point of a pen or paper clip to press the “reset” button beside the filter LED.

4.Filter LED will turn from “RED” to “GREEN” and the display will say “FILTER: 90 DAYS”.

VII. REPLACEMENT PARTS KIT

Figure 10

Figure 11

Figure 12

Figure 13

For replacement parts, contact your local heating service company. Any

questions, please contact Field Controls at:

PHONE: 252-522-3031 FAX: 252-522-0214 EMAIL:

SALES@FIELDCONTROLS.COM

Limited Warranty

Field Controls, L.L.C. warrants that the following Field Controls, L.L.C. products sold hereunder, shall be free from defects in material and workmanship under normal use for eighteen (18) months from date of manufacturing by the consumer excepting the provisions numbered below.

UV-LAMPS/BULBS

Field Controls, L.L.C. warrants that the following Field Controls, L.L.C. products sold hereunder, shall be free from defects in material and workmanship under normal use for ninety (90) days from date of installation by the consumer excepting the provisions numbered below.

Provisions:

1.Field Controls shall have no obligation in the event the customer is unable to provide receipt showing the date the customer purchased the product(s) or accurate date code information.

2.The product must be properly installed, maintained and operated under normal conditions.

3.Field Controls shall not be liable for any consequential and incidental damages, resulting from failure of a Field Controls, L.L.C. product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Field Controls, L.L.C. and the customer.

4.Field Controls, L.L.C. products are often intended for use in specific applications. Field Controls, L.L.C. makes no warranty if a Field Controls, L.L.C. product is used in applications other than intended.

5.Field Controls, L.L.C. makes no warranty of any kind in regard to any other manufacturer’s products distributed by Field Controls, L.L.C. Field Controls, L.L.C. will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.

The health aspects associated with the use of these products and their ability to aid in disinfecting of environmental air have not been investigated by UL.

WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness. Never operate the UV-Aire™ Air Purifying System withPagethe4UV chamber door open. Avoid touching the glass portion of the lamp with your hands.

Image 4
Contents Safety Considerations Items Included in SystemIndication for USE UV-500C SET UP ProcedureGeneral Information VI. Replacement Procedures IV. MaintenanceIV. Operation VII. Replacement Parts KIT Limited Warranty

UV-500C specifications

The Field Controls UV-500C is a state-of-the-art UV air and surface disinfection system designed to promote healthier indoor environments. This innovative device has gained recognition for its effective application in residential and commercial settings, ensuring the elimination of harmful pathogens present in the air and on surfaces.

One of the standout features of the UV-500C is its advanced UV-C technology. This technology utilizes short-wavelength ultraviolet light to disrupt the DNA of microorganisms, rendering them unable to reproduce and effectively neutralizing viruses, bacteria, and mold spores. This mechanism makes it an especially valuable tool in spaces where air quality is paramount, such as hospitals, schools, offices, and homes.

Another significant characteristic of the Field Controls UV-500C is its compact design. This allows for easy integration with existing HVAC systems without requiring substantial modifications. The unit is designed for straightforward installation, making it accessible for both professionals and DIY enthusiasts. The lightweight and compact footprint also means it can fit into tight spaces while still delivering powerful performance.

The UV-500C is equipped with dual UV-C lamps that deliver a high intensity of UV light, ensuring comprehensive disinfection of air passing through the system. The system is compatible with various duct sizes, enhancing its versatility across different applications. Furthermore, the device is designed with safety in mind, including features that prevent UV exposure to occupants when the system is operated.

Additionally, the UV-500C offers continuous air and surface disinfection, greatly reducing the risk of illness and improving overall indoor air quality. Regular use of the system can contribute to a cleaner atmosphere, reducing allergen levels and creating a healthier environment for occupants.

In terms of maintenance, the UV-500C is user-friendly, with easy access to the UV lamps for periodic replacement. Field Controls also emphasizes the importance of regular maintenance to ensure the system operates at peak efficiency, contributing to long-term effectiveness of disinfection.

Overall, the Field Controls UV-500C stands out for its commitment to health and safety, advanced technology, easy installation, and powerful disinfection capabilities. As more individuals and organizations prioritize air quality and sanitation, devices like the UV-500C are becoming essential components in the fight against harmful pathogens in indoor environments.