Safety Instructions

CAUTION

Before attempting to perform any service or mainte- nance, turn the electrical power to unit OFF at the disconnect switch.

WARNING

Do not set thermostat below 60°F (16°C) in heating mode. Setting thermostat below 60°F (16°C) reduces the number of heating cycles. Damage to the unit may occur that is not covered by the warranty.

WARNING

If overheating occurs or if gas supply fails to shut off, shut off the manual gas valve to the furnace before shutting off electrical supply.

WARNING

Do not use this furnace if any part has been under- water. A flood−damaged furnace is extremely dan- gerous. Attempts to use the furnace can result in fire or explosion. Immediately call a licensed pro- fessional service technician (or equivalent) to in- spect the furnace and to replace all gas controls, control system parts, and electrical parts that have been wet or to replace the furnace, if deemed neces- sary.

NOTICE

Any additions, changes, or conversions required in order for the appliance to satisfactorily meet the ap- plication needs must be made by a licensed profes- sional installer (or equivalent) using factory−speci- fied and approved parts.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause property damage, person- al injury or loss of life. Installation and service must be performed by a licensed professional installer (or equivalent), a service agency, or the gas supplier.

1 − Keep the furnace area clear and free of combustible

material, gasoline, and other flammable vapors and

liquids. If it is installed in an insulated area, the furnace must be kept free of insulating material. Insulating ma- terial may be combustible.

2 − After any heavy snow, ice or frozen fog event, the fur- nace vent pipes may become restricted. Always check the vent system and remove any snow or ice that may be obstructing the plastic intake or exhaust pipes.

3 − DO NOT obstruct air flow to unit. Unit must receive an unobstructed flow of combustion and ventilating air. DO NOT block or obstruct air openings on the furnace or air openings to the area in which the furnace is installed. Take care to maintain established clear- ances surrounding the furnace.

4 − DO NOT store chlorine or fluorine products near unit or introduce these products into the combustion air. These products can cause furnace corrosion.

5 − DO NOT draw return air from a room where this fur- nace, or any other gas appliance (ie., a water heat- er), is installed. When return air is drawn from a room, a negative pressure is created in the room. If a gas ap- pliance is operating in a room with negative pressure, the flue products can be pulled back down the vent pipe and into the room. This reverse flow of the flue gas may result in incomplete combustion and the formation of carbon monoxide gas. This toxic gas might then be distributed throughout the house by the furnace duct system.

WARNING

The blower door must be securely in place when the blower and burners are operating. Gas fumes, which could contain carbon monoxide, can be drawn into the living space resulting in personal injury or death.

Your furnace is a gas appliance. It is critical that the gas supplied to the unit be completely burned to avoid the pro- duction of carbon monoxide gas. Complete combustion of the gas requires, but is not limited to, correct gas pressure and gas flow rate, adequate combustion, air, and proper venting.

WARNING

Carbon monoxide gas is invisible, odorless and toxic.

Exposure to carbon monoxide gas can cause personal inju- ry and even death to all occupants, including pets. Any item that is powered by or gives off heat from a combustion pro- cess (including lawn mowers, automobiles, and fireplaces) has the potential to produce carbon monoxide gas. Because of this, Lennox recommends the use of a carbon monox- ide detector in your home, even if you do not own gas appliances. Reliable detectors are available at reasonable retail prices. Contact your Lennox dealer for more details about this investment in your safety.

Your furnace is designed to meet standards set by nation- al agencies, and to operate safely when properly installed

Page 3

LENOX GAS FURNACE, ML180UH specifications

Lennox International Inc. is a name synonymous with quality and innovation in the heating, cooling, and ventilation industry. Among their impressive lineup is the ML180UH gas furnace, a model that exemplifies efficiency, reliability, and advanced technology. Whether you're upgrading an existing heating system or investing in a new one, the ML180UH is a solid option.

One of the main features of the ML180UH is its exceptional energy efficiency. With an Annual Fuel Utilization Efficiency (AFUE) rating of up to 80%, this furnace converts a significant portion of the fuel it consumes into usable heat. This high-efficiency rating not only keeps your home warm but also helps reduce energy consumption and utility bills, making it an environmentally friendly choice.

The ML180UH incorporates a durable, multi-speed blower that plays a crucial role in enhancing comfort. This blower adjusts airflow according to the heating requirements of your home, ensuring consistent and uniform heat distribution. The result is a more comfortable living space with fewer temperature fluctuations.

One standout technology featured in the ML180UH is its design that allows for quiet operation. Lennox has engineered this furnace to minimize noise, thanks to sound-dampening materials and advanced engineering. Homeowners can enjoy a warm home without the disruptive sounds often associated with traditional heating systems.

Another characteristic that sets the ML180UH apart is its commitment to reliability. Built with high-quality materials and rigorous testing standards, this furnace is designed to withstand the rigors of daily use. Additionally, it includes a limited warranty, providing peace of mind and assurance of performance.

The ML180UH is also compatible with a wide range of Lennox accessories and technologies, including humidity control and smart thermostats. These add-ons can enhance your comfort and integrate seamlessly into your home’s existing systems.

In conclusion, the Lennox ML180UH gas furnace stands out for its energy efficiency, advanced features, and reliable operation. By choosing this model, homeowners can enjoy a warm, comfortable living space while benefiting from reduced energy costs. With its focus on quality and performance, Lennox continues to be a leader in the heating industry, making the ML180UH a compelling choice for anyone in need of a new furnace.