Important Directions

1 - Keep the furnace area clear and free of combustible material, gasoline, and other flammable vapors and liq- uids. If installed in an insulated area, furnace must be kept free of insulating material. Insulating material may be combustible. Inspect furnace venting system to make sure it is in place, physically sound, and without holes, corrosion, or blockage. Inspect furnace return air duct connection to ensure duct is sealed to the fur- nace and terminates outside the space containing the furnace. Inspect the physical support of the furnace to guarantee that it is sound without sagging, cracks or gaps around base and it maintains seal between base and support.

2 - DO NOT obstruct air flow to unit. Unit must receive an unobstructed flow of combustion and ventilating air.

3 - DO NOT store chlorine or fluorine products near unit or introduce these products into the combustion air. These products can cause furnace corrosion.

4- DO NOT draw return air from a room where this furnace, or any other gas appliance (ie., a water heater), is installed. When return air is drawn from a room, a negative pressure is created in the room. If a gas appliance is operating in a room with negative pressure, the flue products can be pulled back down the vent pipe and into the room. This reverse flow of the flue gas may result in incomplete combustion and the formation of carbon monoxide gas. This toxic gas might then be distributed throughout the house by the furnace duct system.

Your furnace is a gas appliance. It is critical that the gas

supplied to the unit be completely burned to avoid the pro- duction of carbon monoxide gas. Complete combustion of the gas requires, but is not limited to, correct gas pres- sure and gas flow rate, adequate combustion, air, and proper venting.

WARNING

Carbon monoxide gas is invisible, odorless, and toxic.

Exposure to this gas can cause personal injury and even death to all occupants, including pets. Any item that is powered by or gives off heat from a combustion process

(including lawn mowers, automobiles, and fireplaces) has the potential to produce carbon monoxide gas. Be-

cause of this, Lennox recommends the use of a car- bon monoxide detector in your home, even if you do

not own gas appliances. Reliable detectors are avail- able at reasonable retail prices. Contact your indepen- dent Lennox dealer for more details about this invest- ment in your safety.

Your furnace is designed to meet standards set by nation- al agencies, and to operate safely when properly installed and maintained. However, the unit’s performance can be greatly impacted by the individual installation and the op- erating environment. It is your responsibility to ensure that this appliance is maintained. Proper maintenance is critical for your safety and the satisfactory operation of the product. Lennox strongly recommends annual in- spection and maintenance of this appliance. Contact your independent Lennox dealer for an inspection by a qualified service technician.

spection and maintenance of this appliance. Contact

your independent Lennox dealer for an inspection by a qualified service technician.

Lighting Information and Operation

WARNING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

2=CA!

G24M SERIES specifications

Lennox International Inc. is a well-respected name in the HVAC industry, known for its innovative and energy-efficient products. Among its impressive lineup, the G24M Series stands out as a reliable solution for residential and light commercial applications. The G24M Series is designed to provide optimal heating and air conditioning performance while maximizing energy efficiency.

One of the standout features of the G24M Series is its versatile performance capabilities. Equipped with a multi-speed blower motor, the system can adjust airflow for various heating and cooling needs, ensuring comfort in any season. This adaptability allows users to benefit from consistent temperatures without the fluctuations often associated with traditional HVAC systems. Additionally, the G24M Series uses advanced engineering to minimize noise levels, delivering a quieter living environment.

The G24M Series also emphasizes energy efficiency, boasting high Seasonal Energy Efficiency Ratios (SEER) and Heating Seasonal Performance Factors (HSPF). These ratings indicate that the unit consumes significantly less energy compared to standard models, which can lead to lower utility bills. Lennox’s dedication to sustainability is evident in the G24M Series, as it meets or exceeds energy efficiency standards set by government regulations.

A unique technology incorporated within the G24M Series is its use of communicating technology. This feature allows the system to communicate with compatible smart thermostats and controls, enabling users to optimize settings with ease. This connectivity supports remote access via mobile devices, providing convenience and enhancing user comfort by allowing for temperature adjustments even when users are away from home.

Moreover, the G24M Series is engineered with durable components that enhance overall reliability. With a robust design and quality construction, this system is built to withstand various environmental conditions while requiring minimal maintenance. The system’s longevity is reinforced by regular performance checks and system diagnostics, ensuring peak operation over time.

In conclusion, the Lennox G24M Series encompasses key features that address both comfort and efficiency. With its multi-speed blower, energy-efficient performance, advanced technology, and durable design, the G24M Series is an ideal choice for anyone looking to improve their indoor climate while reducing energy costs. Lennox International Inc. continues to lead the way in innovative HVAC solutions, and the G24M Series exemplifies their commitment to excellence in the field.