Introduction

80K-15

Electronic Air Cleaner Probe

Instruction Sheet

The 80K-15 Electronic Air Cleaner Probe (hereafter referred to as “the probe”) is a low energy probe that extends the voltage measuring capability of an ac/dc voltmeter or multimeter.

Properly connected, the probe is rated to 15 kV Overvoltage Category I. The use of the probe is restricted to low energy applications, which are energy limited circuits like electrostatic air cleaners. Do not use this probe to

measure high voltages on power distribution systems.

The probe is a precision 1000 : 1 voltage divider formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and thereby optimizes measurement accuracy.

WRead First: Safety Information

WWarning

To avoid possible personal injury or electrical shock:

∙Use the probe within its voltage ratings and in dry conditions (no condensation is present).

∙Be familiar with and exercise all possible high voltage safety practices.

∙DO NOT use this probe to measure high voltage on power distribution systems.

∙Always hold the probe by its gray handle. Never allow the probe tip or the yellow part of the probe to make body contact.

∙Before making a measurement, make sure that the side of the probe plug with the GND tab is plugged into the low (COM) terminal of the meter.

∙Attach the grounding lead to earth ground.

∙Use a meter with an impedance of 10 MΩ ( ± 1% ).

Using a meter with an input impedance less than 10 MΩ reduces the accuracy of the reading by causing it to be lower than the voltage present.

∙DO NOT use the probe with a Fluke multimeter that is in the kChek™ or Automatic Selection mode (i.e.

Fluke 16, Fluke 12B etc.). The input impedance in these modes is very low.

∙Make sure the probe tip is firmly attached to the body of the probe.

∙DO NOT use the probe around explosive gas, vapor, or dust.

∙DO NOT use the probe if it operates abnormally. Protection may be impaired. When in doubt have the probe serviced.

PN 690385 May 1998

80K-15 specifications

The Fluke 80K-15 is a high-precision voltage measuring device that stands out for its remarkable ability to accurately measure high voltages in various applications. Designed primarily for electrical engineers and technicians, it is particularly valued in industries like power generation, maintenance, and electrical troubleshooting.

One of the standout features of the Fluke 80K-15 is its extensive voltage range. Capable of measuring up to 15,000 volts, it allows users to handle a wide variety of tasks safely and efficiently. This impressive range makes it ideal for both field and laboratory environments, catering to the rigorous demands of professionals working with high-voltage systems.

In addition to its high voltage capacity, the 80K-15 is engineered with advanced safety features. Its insulated design ensures that users remain protected from electric shock, while the robust casing is built to withstand both physical wear and environmental challenges. It meets a variety of safety certifications, making it a reliable choice for any worksite.

The Fluke 80K-15 also integrates effectively with standard multimeters, offering a level of ease and flexibility that simplifies voltage testing. Users can conveniently connect the device, and the clear, easy-to-read display enables quick interpretation of readings. This adaptability extends its utility across various applications, including industrial maintenance, electrical installations, and equipment repairs.

Another key characteristic of the Fluke 80K-15 is its exceptional accuracy. Featuring a precise measurement capability, it helps ensure that professionals can make well-informed decisions based on reliable data. With a high degree of resolution, it is capable of delivering measurements that are crucial for troubleshooting and diagnostic purposes.

This voltage probe is compatible with several popular Fluke multimeter models, making it a valuable addition to existing troubleshooting kits. The flexibility of use enhances its value, allowing technicians to measure high voltages without the need for a dedicated meter.

In conclusion, the Fluke 80K-15 is a sophisticated tool that combines robust construction, high-capacity voltage measurement, and safety features to deliver an exceptional user experience. Whether for fieldwork or laboratory applications, it stands out as an essential instrument for anyone dealing with high-voltage systems. Its blend of precision, safety, and versatility makes it an indispensable choice for electrical professionals.