Important Directions, Thermostats | Lenoxx Electronics 80MGF

Important Directions

1 - Keep the furnace area clear and free of combustible material, gasoline, and other flammable vapors and liq& uids. If installed in an insulated area, furnace must be kept free of insulating material. Insulating material may be combustible. Inspect furnace venting system to make sure it is in place, physically sound, and without holes, corrosion, or blockage. Inspect furnace return air duct connection to ensure duct is sealed to the fur& nace and terminates outside the space containing the furnace. Inspect the physical support of the furnace to guarantee that it is sound without sagging, cracks or gaps around base and it maintains seal between base and support.

2 - DO NOT obstruct air flow to unit. Unit must receive an unobstructed flow of combustion and ventilating air.

3 - DO NOT store chlorine or fluorine products near unit or introduce these products into the combustion air. These products can cause furnace corrosion.

4- DO NOT draw return air from a room where this furnace, or any other gas appliance (ie., a water heater), is installed. When return air is drawn from a room, a negative pressure is created in the room. If a gas appliance is operating in a room with negative pressure, the flue products can be pulled back down the vent pipe and into the room. This reverse flow of the flue gas may result in incomplete combustion and the formation of carbon monoxide gas. This toxic gas might then be distributed throughout the house by the furnace duct system.

Your furnace is a gas appliance. It is critical that the gas

supplied to the unit be completely burned to avoid the pro&

duction of carbon monoxide gas. Complete combustion of the gas requires, but is not limited to, correct gas pres& sure and gas flow rate, adequate combustion air, and proper venting.

WARNING

Carbon monoxide gas is invisible, odorless, and toxic.

Exposure to this gas can cause personal injury and even death to all occupants, including pets. Any item

that is powered by or gives off heat from a combustion process (including lawn mowers, automobiles, and fire&

places) has the potential to produce carbon monoxide

gas. Because of this, Lennox recommends the use of a carbon monoxide detector in your home, even if you do not own gas appliances. Reliable detectors

are available at reasonable retail prices. Contact your

independent Lennox dealer for more details about this

investment in your safety.

Your furnace is designed to meet standards set by nation&

al agencies, and to operate safely when properly installed and maintained. However, the unit's performance can be

greatly impacted by the individual installation and the op& erating environment. It is your responsibility to ensure that this appliance is maintained. Proper maintenance is

critical for your safety and the satisfactory operation of the

product. Lennox strongly recommends annual in,

spection and maintenance of this appliance. Contact

your independent Lennox dealer for an inspection by a

qualified service technician.

Lighting Information and Operation

WARNING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

To place 80MGF furnace into operation:

80MGF units are equipped with an electronic ignition system. Do not attempt to manually light burners on these furnaces. Each time thermostat calls for heat, the burner will automatically light.

Gas Valve Operation (Figures 2 and 3)

1 - STOP! Read the safety information at the beginning of this section.

2 - Set thermostat to lowest setting. See figure 1.

THERMOSTATS

FIGURE 1

3 - Turn off all electrical power to appliance.

4 - This appliance Is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

5 - Remove the access panel.

Page 3

80MGF specifications

Lenoxx Electronics has earned a reputation for delivering quality audio and visual products, and the Lenoxx Electronics 80MGF is no exception. This model is a well-crafted multimedia speaker system that offers an impressive audio experience, making it a desirable choice for music enthusiasts and casual listeners alike.

One of the standout features of the 80MGF is its robust sound quality. The system integrates high-fidelity speakers that are engineered to produce a balanced sound profile. Users can expect a rich bass response, clear mid-range tones, and crisp highs, which make it suitable for various music genres, from classical to rock. This speaker system can elevate your music experience, whether you are hosting a gathering or enjoying a quiet evening at home.

In terms of technology, the 80MGF boasts Bluetooth connectivity, allowing users to stream music effortlessly from their smartphones, tablets, or other compatible devices. This wireless capability eliminates the hassle of tangled cords and offers the convenience of controlling playback from a distance. Additionally, the system supports a range of input options, such as USB and auxiliary connections, catering to different device compatibility needs.

The design of the 80MGF is sleek and modern, allowing it to blend seamlessly into various interior styles. Its compact size makes it easy to place in any room without occupying too much space, while still being powerful enough to deliver impressive sound output. The intuitive controls are positioned for easy access, ensuring that users can adjust volume and settings with minimal effort.

Another characteristic worth noting is the durability of the Lenoxx Electronics 80MGF. Built with high-quality materials, this speaker system is designed to withstand regular use without compromising performance. The long-lasting construction also contributes to a sustainable purchase, as it minimizes the need for frequent replacements.

In summary, the Lenoxx Electronics 80MGF is an outstanding multimedia speaker system featuring high-quality audio performance, versatile connectivity options, and an appealing design. It is tailored for users who value both style and substance, making it an excellent addition to any audio setup. Whether you're an audiophile or simply seeking a reliable speaker system for everyday use, the 80MGF delivers on all fronts, ensuring an enjoyable listening experience.