Dimplex DF1136L, DF1135M owner manual Pedestal Installation Instructions

Page 11

Fireplace Installation

Pedestal Installation

Instructions

WARNING: Failure to install the fireplace as instructed below may result in damage to the equipment and or may expose the user to the risk of fire, serious injury, illness or death.

CAUTION: High temperature, keep electrical cords, drapery, and other furnishings at least

3 ft (0.9m) from the front of the heater and away from the side and rear.

Tools Required

• #2 Phillips screwdriver

1.Carefully lay the fireplace down on its front.

!Note: If necessary, lay a protective barrier between the front glass and your work surface, (i.e. cloth, cardboard, thick plastic) to avoid scratching the glass or your work surface.

2.Assemble the pedestal by attaching the vertical supports to the base. (Figure 7)

3.Position the pedestal on the back of the firebox so that it lines up with the provided mounting holes.

Figure 7

Verticle

Supports

Base

Figure 8

Pedestal

4.Secure the pedestal to the firebox with the provided screws. (Figure 8)

5.Orient the firebox so that it is standing upright.

6.Mount hardware for trim in- stallation to unit as described in installation guide provided with trim.

7.Carefully pour and evenly dis- tribute the supplied media in

11

Image 11
Contents Model DF1135M DF1136L Table of Contents Please carefully read and save these instructions Welcome & CongratulationsImportant Instructions Important Instructions Important Instructions Quick Reference Guide Fireplace InstallationTools Required Approximate time 30 minutes for installationScrew Wall Bracket Media Tray Pedestal Installation Instructions Operation On/Off SwitchPosition Switch Manual Control Buttons Remote Control UsageBattery Replacement Remote Control Initialization/ ReprogrammingPartially Reflective Glass Cleaning MaintenanceProducts to which this limited warranty applies WarrantyWarranty DF1135 Replacement Parts