10
FIREBOX FINISHES
There are a wide variety of “finished looks” for your
Only noncombustible materials like marble, stone, tile, brick, etc. may overlap the black front facing but be sure not to block the upper or lower grilles. Seal all joints between the black facing and wall surrounds to prevent air intru- sion. Use noncombustible caulking material only to seal the black metal facing to the sur- round material on the finished wall.
REPLACEMENT PARTS
An exploded view of the firebox with num- bered parts and a replacement parts list can be found on page 11. Normally, all parts should be ordered through your distributor or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1.The model number of the firebox.
2.The serial number of the firebox.
3.The part number.
4.The description of the part.
5.The quantity required.
6.The installation date of the firebox.
If you encounter any problems or have any questions concerning the installation of a un- vented heater in this system, please contact your distributor or dealer.
ACCESSORIES AND COMPONENTS
Blower Kits |
|
|
80L84 | ||
80L85 |
Blower Kit
The
Decorative Volcanic Stone | 80L42 | FDVS |
Decorative Volcanic Stone
The decorative volcanic stone, Model FDVS, can be used to enhance the look of your appli- ance. Decorative volcanic stone is standard with this appliance. Order model FDVS for replacement of stone when needed. Spread the decorative volcanic stone evenly around the bottom of the firebox.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.