Kompernass ZTS 10 B16 Animal Clippers Intended use, Safety instructions, Items supplied

Page 4

Animal Clippers

Intended use

These animal clippers are intended exclusively for the cutting and trimming of animal hair in domestic households. This appliance is not intended for use in commercial/industrial applications. Usage other than as described here is not permitted and may cause damage or injury. For damage resulting from misuse or improper handling, the use of force

or unauthorized modification, no liability will be assumed.

Safety instructions

To avoid the risk of accidents and injuries:

This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person respon- sible for their safety or receive from this person instruction in how the appliance is to be used.

Children should be supervised to ensure that they do not play with the appliance.

Use only the original accessory parts for this device.

Check the cutting head for proper function before using the appliance.

Never use the appliance with a damaged or broken trimming guide. The absence of teeth on the trimming guide can lead to injury.

Switch the appliance off before you put it down.

To avoid the risk of an electric shock:

Connect the appliance only to correctly installed and earthed mains sockets that are easily accessible. Ensure that the rating of the local power supply tallies completely with the details given on the rating plate of the device.

Ensure that the power cable does not become damaged. Protect the power cable from sources of heat and ensure that it cannot be damaged.

To avoid risks, arrange for defective plugs and/ or cables to be replaced at once by qualified technicians or our Customer Service Department.

Do not use the appliance in the close vicinity of a bath/shower or a sink filled with water. The proximity of moisture presents a danger, even when the appliance is switched off.

NEVER submerse the appliance in water or other liquids.

Should the appliance be dropped into water, ABSOLUTELY disconnect the plug from the mains socket before extracting the appliance.

After use or when cleaning it, ALWAYS remove the plug from the mains power socket. Do not pull on the power cable directly, pull the plug.

The appliance is suitable for use only in dry areas.

Attention! Keep the appliance dry.

Do not use the unit while the animal is being bathed or when the fur is wet.

Items supplied

Animal clippers with blade guard 6 Trimming guides

Cleaning brush Blade oil

This operating manual

Technical Data

Power supply:

230 V~/50 Hz

Power consumption:

10

W

Protection class:

II /

 

Operating temperature:

+

5

°C-+ 40 °C

Storage temperature:

0

°C - + 40 °C

- 2 -

Image 4
Contents Animal Clippers ZTS 10 B1 ZTS 10 B1 Animal Clippers Safety instructions Technical DataAnimal Clippers Intended use Items suppliedCleaning and Care CE- ConformityDescription of the appliance OperationWarranty and Service DisposalImporter Contact your waste disposal centre