Euro-Pro V1504C manual Operating Instructions To Order Replacement Supplies, Troubleshooting

Page 7

OPERATING INSTRUCTIONS

TO ORDER REPLACEMENT SUPPLIES

Motor Thermostat IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off pedal once.

•Disconnect the plug from the power source.

•Find the source of the overheating problem. (i.e. clogged hose or dirty filter)

•If clogged hose or dirty filter is found, unclog the hose and/or clean or replace the filter.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for 45 minutes, plug in the cleaner and press on the On/Off pedal. The vacuum should start again. If the vacuum still does not start, or if the thermostat switches off the unit again contact customer service at 1 (800) 798-7398.

for Model V1504C

Call: 1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkclean.com

ITEM

PART #

 

 

Pre-Motor Filter

XSH1504

 

 

Drive Belt

XL1504

 

 

TROUBLESHOOTING

This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience.

PROBLEM

 

POSSIBLE CAUSE

 

POSSIBLE SOLUTION

 

1.

Not properly plugged into wall

1.

Plug in firmly.

Cleaner Won’t

 

outlet.

2.

Check fuse or breaker.

2.

No electricity in wall outlet.

3.

Push On/Off pedal to turn on.

Run

3. On/Off pedal not turned on.

4. Reset motor thermostat.

 

4.

Motor thermostat tripped.

5. Check fuse or breaker. Replace fuse or

 

5.

No power in electrical outlet.

 

reset breaker

 

 

 

 

 

 

1.

Full or clogged dust cup.

1.

Clean dust cup.

 

2.

Adjust setting.

 

2.

Wrong pile height setting.

 

3.

Remove obstruction.

 

3.

Clogged nozzle.

Cleaner Won't

4.

Remove power nozzle base plate and

4. Clogged dust inlet port.

 

remove obstruction.

Pick Up

5. Clogged hose.

 

5.

Remove obstruction.

 

6.

Broken/ worn out belt.

 

6.

Replace belt.

 

7.

Hose not inserted fully.

 

7.

Push hose in securely at both ends.

 

8.

Dirty filters and filter frame

 

8.

Clean/change filters and filter frame.

 

 

 

 

 

 

 

 

Cleaner Picks

 

 

 

 

Up Moveable

 

 

 

 

Rugs Or

1.

Wrong pile height setting.

1.

Adjust setting.

Pushes Too

 

 

 

 

Hard

 

 

 

 

 

 

 

 

 

Beater Brush

1.

Broken/worn out belt.

1.

Replace belt.

Does Not Turn

2.

Belt installed incorrectly.

2.

Check belt changing instructions.

 

 

 

 

 

Turbo Brush

1.

Rotating brush or turbine

1.

Clear obstructions.

Does Not

 

obstructed.

 

2.

Call Customer Service.

Rotate Or

2.

Belt broken.

3.

Clear obstruction.

Rotates Slowly

3. Hose obstructed.

 

 

 

 

 

 

 

Air Flow

1.

Attachment use restricts air

 

 

 

flow.

1. Check attachment.

Restricted With

 

2.

New carpet debris clogging

2. Remove obstruction.

Attachment Use

 

air path.

 

 

 

 

 

 

 

11

FOR TECHNICAL SUPPORT

Call: 1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note:

The dust cup screen and pre-motor filter are washable. We recommend washing the pre-motor filter once every three months or when suction appears to be reduced. DO NOT wash in the dishwasher.

The pre-motor filter should however be replaced once every year depending on the amount of use, to ensure peak performance of your vacuum.

IMPORTANT:

Make sure that ALL washable filters and the pre-motor filter frame are completely dry before inserting back in the vacuum. Allow the pre-motor filter and pre-motor filter frame to air dry for 24 hours. DO NOT DRY IN THE DRYER.

12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PET Clean Getting to Know Your Bagless Upright Vacuum Technical SpecificationsFront Back Assembling Your Vacuum Cleaner Precautionary Measures Operating InstructionsWinding & Unwinding Power Cord Emptying the Dust Cup Container Cleaning the Dust Cup Screen and Dust CupDo not DRY ANY Parts in the Dryer Extension Tube Cleaning the Pre-Motor FilterUsing the Vacuum for Above Floor Cleaning Cleaning the Pet Hair Turbo BrushChanging the Belt Cleaning the Beater BrushPlease Note Operating Instructions To Order Replacement SuppliesTroubleshooting Problem Possible Cause Possible SolutionModel V1504C Consignes DE Sécurité ImportantesSpécifications Techniques FAMILIARISEZ-VOUS Avec Votre Aspirateur Vertical Sans SACMesures DE Sécurité AvantSuggestions pour lajustement de la hauteur Mode D’EMPLOIAjustement pour la Hauteur du Tapis Enroulement et Déroulage du Cordon ÉlectriqueSuceur Plat Utiliser les AccessoiresNettoyage du Tamis du Récipient à Poussière et du Récipient Nettoyage du Filtre Pré-MoteurNettoyage de la Brosse Turbo pour Poils d‘Animaux Brosse TurboUtilisation de l‘Aspirateur Après le Nettoyage du Plancher Nettoyage de la Brosse Fouet Veuillez Prendre Note Pour Commander DES Pièces DE RemplacementDépannage Pour le Modèle V1504CModèle V1504C Garantie Limitée DE UN 1 AN

V1504C specifications

The Euro-Pro V1504C is a cutting-edge vacuum cleaner designed to offer exceptional cleaning performance while maintaining user-friendly features. Engineered with advanced technologies, the V1504C stands out in the crowded vacuum cleaner market by combining powerful suction with versatile functionality, making it an ideal choice for households seeking a comprehensive cleaning solution.

One of the standout characteristics of the Euro-Pro V1504C is its robust 12-amp motor, which delivers powerful suction for effective dirt and debris removal from a variety of surfaces. Whether you are tackling carpets, hardwood floors, or upholstery, this vacuum's strong suction capability ensures a deep clean every time. The bagless design not only eliminates the hassle of replacing vacuum bags but also makes it easy to empty the dust container, contributing to a more sustainable cleaning approach.

The V1504C is equipped with advanced filtration technology that captures allergens and fine particles, making it an excellent option for allergy sufferers. Its HEPA filter traps 99.97% of dust, pollen, and other airborne irritants, promoting a healthier indoor environment. This feature highlights the vacuum's commitment to not just cleaning surfaces but also improving air quality within the home.

Moreover, the vacuum features a range of attachments and tools to enhance its versatility. Included are a crevice tool for tight spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for cleaning furniture. These attachments allow users to tackle a variety of cleaning tasks with ease, from reaching under furniture to maintaining the integrity of rugs and drapes.

The Euro-Pro V1504C is designed with user convenience in mind. It features an ergonomic handle and lightweight construction, making it easy to maneuver throughout the home. The vacuum also has a large capacity dust bin, allowing for extended cleaning without frequent interruptions to empty the container.

In summary, the Euro-Pro V1504C is a powerful, versatile, and efficient vacuum cleaner that stands out for its advanced features and technologies. With its strong suction, effective filtration, and user-friendly design, this vacuum is poised to meet the cleaning needs of any modern household, ensuring a cleaner and healthier living space for all.
Top Page Image Contents