Trane SCIH manual Plenum Installation, Figure I-IP-4. Plenum installation

Page 18

Installation

Installation Procedure

Plenum Installation

Reference Figure I-IP-4 and follow the procedure below to install the plenum.

1.Before installing the plenum, ensure the evaporator fan is in the discharge position. If not, see the fan discharge conversion procedure on page 16.

2.Apply the soft gasket material provided completely around the top of the unit frame as shown in the detail drawing.

3.Tighten the screws provided as shown. Use screws on the rear, right, and left sides through the pilot holes on the plenum panels.

4.After the plenum is installed, adjust the motor pulley for the correct airflow and discharge grille for the correct airflow direction.

A

Figure I-IP-4. Plenum installation

SOFT GASKET (PROVIDED)

SELF-DRILLING SCREW

1/4" X 1" (PROVIDED)

 

2.0

31.5

 

 

14.72

12.73

14.96

1.57

 

 

18

SXIH-SVX01B-EN

Image 18
Contents Installation, Operation, and Maintenance Model Scih AO and later design sequenceOverview of Manual General informationSpecial Note on Refrigeration Emissions Common Hvac AcronymsContents Installation information GeneralIntegral Air-Cooled Model Number Description Accessory Model Number Description General Information Receiving and Handling Pre-installation Installation considerationsInstallation Preparation Acoustic ConsiderationsInstallation Dimensions Weights Model Scih Ton unitsModel Scih 10 & 15-ton units Scih Component Overview Back of unitSCIHAccessories Plenum Low Ambient DamperHot Water Coil Steam CoilInstallation requirements MechanicalDuctwork Considerations Electrical Requirements Ground WireElectrical Electrical Data CalculationsRLA LRA FLA MCA MFS Installation Checklist InstallationInstallation Procedure Fan Discharge ConversionLow Ambient Damper Installation Figure I-IP-2. Low ambinet damper installationHydronic Coil Installation Figure I-IP-3. Hydronic coil installationPlenum Installation Figure I-IP-4. Plenum installationPre-Startup Checklist Pre-StartupUnit Startup Checklist Installation StartupUnit Startup Procedures Rotating ComponentsSequence Operation OperationSequence of Operation Maintenance information Table M-GI-1. Integral Air-Cooled General DataMaintenance Procedures MaintenanceMaintenance procedures Hazardous chemicalsConfined space hazard Refrigerant LeakTestingRefrigerant System Explosion hazardCompressor damage Hazardous pressureCharging the Refrigerant System Maintenance checklists Periodic ChecklistsPeriodic Possible cause TroubleshootingProblem RemedyInsufficient cooling Trane

SCIH specifications

The Trane SCIH, or Smart Communicating Indoor Unit, is a smart HVAC solution designed to provide both efficiency and comfort in commercial and residential spaces. This innovative system represents a significant advancement in climate control technology, integrating state-of-the-art features that cater to modern demands for convenience, connectivity, and sustainability.

One of the standout features of the Trane SCIH is its advanced communication capability. The system utilizes Trane’s proprietary technology to facilitate seamless communication between various HVAC components, enabling real-time monitoring and adjustments. This integration ensures optimal performance by allowing end-users to manage their climate control settings efficiently from a central location or through a smartphone app.

The SCIH is also designed for high energy efficiency. It incorporates variable speed technology that adjusts the compressor and fan speeds according to the specific heating or cooling needs of the space. This not only reduces energy consumption but also minimizes fluctuations in temperature, creating a more comfortable indoor environment. Additionally, the unit's Energy Efficiency Ratio (EER) and Seasonal Energy Efficiency Ratio (SEER) ratings often exceed industry standards, making it an eco-friendly choice for sustainable building practices.

Another characteristic of the Trane SCIH is its compact and versatile design. The unit is engineered to fit in tight spaces, making it suitable for various building types, including retrofits in older structures. Its sleek design enhances aesthetic appeal without compromising performance, a key consideration for both commercial and residential applications.

Safety and ease of use are also priority features of the SCIH. The model includes built-in diagnostics that can identify issues early, enabling prompt maintenance and reducing the risk of system failures. User-friendly interfaces provide intuitive controls, making it accessible for users of all technical backgrounds.

Overall, the Trane SCIH embodies the convergence of technology, comfort, and efficiency. Its smart features, including advanced communication, variable speed technology, and compact design, position it as a leading solution in the HVAC market. This unit not only meets the needs of the present but is also prepared to adapt to future energy standards and user expectations, reinforcing Trane’s commitment to innovative climate solutions.