Kicker manual Ixsk, Performance, Model IX500.2, Installation

	IX.2-SERIES AMPLIFIERS Owner’s Manual
	IX500.2
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
PERFORMANCE
Model:	IX500.2
RMS Power
@ 14.4V, 4Ω stereo, ≤ 1% THD+N	125W x 2
@ 14.4V, 2Ω stereo, ≤ 1% THD+N	250W x 2
@ 14.4V, 4Ω mono, ≤ 1% THD+N	500W x 1
Length	9-3/8” (238mm)
Height	2-3/16” (55mm)
Width	7-7/8” (200mm)
Frequency Response ± 1dB	20Hz–20kHz
Signal-to-noise Ratio	>95dB, A-weighted, re: rated power
Input Sensitivity	Low Level: 125mV–5V
	High Level: 250mV–10V
Electronic Crossover	Selectable HI/LO/OFF, Variable 50–200Hz, 12dB/octave
Bass Boost	Variable 0–18dB @ 40Hz
Maximum Effi ciency (2Ω)	>80%

Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use genuine KICKER accessories and wiring.

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er. Use the IXSM or IXSK mounting kits (sold separately) to stack multiple IX amplifi ers.

IXSK

sold separately

2 IX AMPLIFIERS

2010 IX 500.2 RevF.indd 2

11/5/2010 12:32:10 PM