Unit Installation

Indoor Unit	6. Unscrew at the return grille
	(Figure 7).

1.Select a location to route tubing, wiring and drain pipe between the indoor and outdoor units.

2.Make a hole in the wall using a key hole saw or hole-cutting drill attachment.

The hole should be made at a slight downward slant to the outdoor side (Figure 5).

Outdoor side

Indoor side

Figure 5

Figure 7

7.Unscrew at the grille bottom hinges, pull out the screw, and unscrew at the side panel front (Figure 8). Then, push down on the side panel front and pull up (Figure 9).

8.5"(215)

0.83"(21)

Figure 10

Note: = A 0.49" x 1.575" - 4 SLOT (Mounting hole) (12.5 mm 40.0 mm)

Unit Size	B
MCX 512-518	36.2" (920)
MCX 524	46.1" (1,170)
MCX 530-536	55.9" (1,420)
MCX 042-048	65.7" (1,670)

Before cutting, check that no pipes or studs are directly behind the place to be cut. Avoid areas where electrical wiring or conduits are located.

3.	Place the unit on a solid and level
	foundation.
4.	Tubing, wiring through and drain
	pipe of low wall and floor
	mounted units can be routed,
	rear or right side of unit when
	facing front.	Figure 8
	Ceiling mounted can be routed	Figure 8
	Ceiling mounted can be routed
	straight downward.
5.	Pull air filters upward (Figure 6).

MCX 060

75.6" (1,920)

8.Place or hang the unit at the selected position.

9.Replace both right and left side panels, and the return grille after the installation of wiring, tubing and piping is complete.

Outdoor Unit

See the proper installation method provided in the Installation Manual for the outdoor unit.

Pull

Figure 6

Figure 9

6		MS-SVN015-EN
MS-SVN015-EN.p65	6	6/27/07, 11:23 AM
	Black

MS-SVN015-EN specifications

The Trane MS-SVN015-EN is a sophisticated and highly efficient system controller designed specifically for enhancing the performance of HVAC systems. This innovative controller is part of Trane's commitment to delivering smart, reliable, and energy-efficient solutions for commercial and residential applications.

One of the main features of the MS-SVN015-EN is its ability to provide advanced control capabilities. This system controller is designed to optimize the operation of HVAC equipment, ensuring that temperature and humidity levels are maintained at comfortable and consistent levels. This is achieved through the integration of various sensors and actuators that continuously monitor environmental conditions and system performance.

The MS-SVN015-EN employs Trane's proprietary control algorithms, which utilize real-time data analytics to make informed decisions about system operation. This technology not only helps to improve occupant comfort but also reduces energy consumption by minimizing unnecessary equipment runtime. By optimizing energy use, the controller can significantly lower utility costs, aligning with today's focus on sustainability.

In terms of connectivity, the MS-SVN015-EN supports a variety of communication protocols, enabling seamless integration with existing building management systems. This feature allows for enhanced monitoring and control capabilities, making it easier for facility managers to maintain HVAC systems efficiently. Additionally, the controller offers user-friendly interfaces, facilitating easy access to system performance data for users of all skill levels.

The MS-SVN015-EN is also equipped with advanced diagnostic capabilities, enabling quick identification and troubleshooting of issues within the HVAC system. This feature is crucial for minimizing downtime and ensuring that building occupants remain comfortable at all times. Furthermore, the controller is designed to be robust and reliable, built to stand up to the demands of continuous operation in diverse environments.

Another important characteristic of the MS-SVN015-EN is its flexibility. It can be configured to manage a wide range of HVAC equipment, from single-zone systems to complex multi-zone applications. This adaptability makes it an ideal choice for various settings, including commercial buildings, educational institutions, and industrial facilities.

In summary, the Trane MS-SVN015-EN is a cutting-edge system controller that combines advanced technology, user-friendly interfaces, and energy-efficient operation. Its ability to enhance HVAC system performance while reducing operational costs makes it a valuable asset for any facility seeking to optimize indoor climate control.