System Checkout, Troubleshooting | Honeywell W8600F guide

W8600F AIR CLEANER MONITOR

12.Connect the three wires from the W8600F to the EAC terminals 1, 3 and 4.

NOTE: Connect terminal 1 to 1, 3 to 3 and 4 to 4.

13.Turn on the EAC power.

14.Turn on the system fan.

15.Push the W8600F reset button. All four indicators on the display will flash five times. The On indicator will stay active as long as the EAC and the system fan are on.

SYSTEM CHECKOUT

Checkout (With EAC Running)

1.Be sure the battery is installed in the W8600F.

2.Press the reset button on bottom of the W8600F. All four indicatiors on the display will flash five times and then ON and FAULT will remain indi- cated.

3.Connect terminal 3 to terminal 4 and the function panel indicates ON. FAULT will turn off.

4.Disconnect terminal 3 from terminal 4. The W8600F is functional.

Checkout (Without EAC)

1.Be sure the battery is installed in the W8600F.

2.Press the reset button on the bottom of the W8600F. All four indicators on the display will flash five times, then ON and FAULT will remain indi- cated.

3.Connect 9 Vdc to terminal 4 with terminal 1 as ground (use a 9-volt transistor battery). The func- tion panel indicates ON and FAULT.

4.Connect terminal 3 to terminal 4 and the function panel indicates ON, FAULT will turn off.

5.Remove 9 Vdc input. The W8600 is functional.

TROUBLESHOOTING

Refer to Table 3.

Table 3. W8600F Troubleshooting Information.


Display		Condition	Solution

Blank		EAC is not operating.	Turn on EAC. Function panel indicates ON.

			Press W8600F reset button. DISPLAY flashes five
			times.

		ON indicator does not flash when	Check W8600F battery for 2.7 volts. Replace with
		reset button is pressed.	BR2032 lithium battery if necessary.

All four indicators flash		Power supply does not have an	Assemble jumper on pins 1 and 2 of J3 connector on
after pressing reset button,		airflow switch.	power supply.
but ON is not displayed
with EAC operation.		Voltage between W8600F	Replace W8600F.
		terminals 1 (ground) and 4 (+10 to
		+15 Vdc).

		No voltage, low voltage or wrong	Check wiring between W8600F and EAC. Correct
		polarity.	wiring, if necessary.

		No voltage between EAC terminals	Check the driver board and cable installation. Correct
		1 (ground) and 4 (+10 to +15 Vdc).	installation if necessary.

BATTERY, SERVICE or		Incorrectly wired.	Check wiring between W8600F and EAC. Correct
FAULT, but not ON			wiring, if necessary.

ON and BATTERY		Bad battery.	Check W8600F battery for 2.7 volts. Replace with
			BR2032 lithium battery, if necessary.

ON and SERVICE		EAC cells and prefilters are dirty.	Wash and reinstall the EAC cells and prefilters. Press
			the W8600F reset button. ON flashes five times and
			SERVICE is off.

ON and FAULT		Damaged cells.	Repair or replace cells.

		Power supply problem.	Press EAC test button and verify output voltage.
			Replace power supply, if necessary.




Automation and Control Solutions
Honeywell International Inc.	Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North	35 Dynamic Drive
Golden Valley, MN 55422	Scarborough, Ontario
	M1V 4Z9

Printed in U.S.A. on recycled

69-1200—2 G.H. Rev. 12-02paper containing at least 10%www.honeywell.com post-consumer paper fibers.

W8600F specifications

The Honeywell W8600F is a versatile and innovative commercial control system designed to enhance the efficiency and effectiveness of heating, ventilation, and air conditioning (HVAC) installations. This device is known for its advanced features and robust performance, making it a preferred choice among HVAC professionals.

One of the key features of the W8600F is its user-friendly interface. With a large, backlit display, users can easily navigate through settings and make quick adjustments. The intuitive programming options allow for customizable scheduling, ensuring that the system operates optimally according to specific needs. This level of flexibility makes it suitable for various environments, including offices, retail spaces, and industrial facilities.

The W8600F boasts advanced communication capabilities. It supports multiple protocols, enabling seamless integration with other building automation systems. This feature is crucial for modern smart buildings that require interconnected systems for optimal performance and energy management. With its compatibility with multiple sensors and controls, the W8600F can monitor temperature, humidity, and CO2 levels, enhancing indoor air quality and comfort.

In terms of technology, the W8600F employs Honeywell's cutting-edge control algorithms, which optimize system performance while reducing energy consumption. The adaptive control feature learns from historical data and adjusts settings intelligently, ensuring that energy is used efficiently without sacrificing comfort. Additionally, the device's ability to perform real-time diagnostics allows for proactive maintenance, minimizing downtime and extending the life of HVAC equipment.

Another characteristic that sets the Honeywell W8600F apart is its durability and reliability. Built to withstand the rigors of commercial use, it operates effectively in various environmental conditions. Its robust design includes advanced surge protection and environmental seals, making it suitable for installation in challenging locations.

The W8600F also focuses on enhancing user experience through its remote access capabilities. Users can monitor and adjust settings from anywhere, thanks to its cloud connectivity. This feature is particularly beneficial in managing multiple sites, as it simplifies oversight and control from a central location.

Overall, the Honeywell W8600F stands out in the HVAC control market due to its blend of innovative technology, user-friendly interface, and robust performance characteristics. Its ability to streamline operations, enhance comfort, and minimize energy costs makes it an invaluable tool for anyone looking to optimize their HVAC systems.

SYSTEM CHECKOUT

Checkout (With EAC Running)

Checkout (Without EAC)

TROUBLESHOOTING

Automation and Control Solutions

W8600F specifications