Specifications, Ordering Information | Honeywell F116 specification

F116 (SERIES 16000) SELF-CONTAINED DUCTABLE COMMERCIAL AIR CLEANER

SPECIFICATIONS

IMPORTANT

The specifications given in this publication do not include normal manufacturing tolerances. Therefore, this unit may not exactly match the listed specifications. This product is tested and calibrated under closely controlled conditions, and some minor differences in performance can be expected if those conditions are changed.

Models:

The F116 (Series 16000) air cleaner is available in two cabinet sizes. The shorter cabinet uses a prefilter with one primary filter while the longer cabinet uses a prefilter with two primary filters. Refer to Table 1 for model descriptions.

Construction:

.0508 in., 16 GA unpainted aluminum

Blower/Motor:

• three speed direct drive forward curve

• 1070 RPM nominal speed

• thermal circuit breaker

NOTE: Oil annually.

Static Pressure:

Minimum: 1.2" W.G.

Maximum: 1.85" W.G.

Electrical Ratings:

Running Load (all three fan speeds): must not exceed 14A at 120V or 7A at 220V.

Refer to Table 2 for maximum starting loads.

Table 1. F116 (Series 16000) Description.

Model	Voltage	Filtering	Contains	Suggested Applications
Model	Voltage	Stages	Contains	Suggested Applications
		Stages

F116A1021	120 Vac, 60 Hz,	Two	1 prefilter and	Medical isolation wards, industrial clean rooms,
F116A1021	1PHS, 14A	Two	1 HEPA filter	and source capture of highly toxic particulates
	1PHS, 14A		1 HEPA filter	and source capture of highly toxic particulates

F116A1047	120 Vac, 60 Hz,	Two	1 prefiltera	Any airborne particulate or gas/odor/VOC, but
	1PHS, 14A			not in combination
F116A1120	120 Vac, 60 Hz,	Three	1 prefiltera	Any particulate and/or gas/odor/VOC
	1PHS, 14A
F116A1122	220 Vac, 50/60 Hz,	Two	1 prefilter and	Medical isolation wards, industrial clean rooms,
F116A1122	1 PHS, 7A	Two	1 HEPA filter	source capture of highly toxic particulates
	1 PHS, 7A		1 HEPA filter	source capture of highly toxic particulates

F116A2021S	220 Vac, 50/60 Hz,	Three	1 prefilter and	Medical isolation wards, industrial clean rooms,
F116A2021S	1 PHS, 7A	Three	1 HEPA filter	source capture of highly toxic particulates
	1 PHS, 7A		1 HEPA filter	source capture of highly toxic particulates
F116A2121	220 Vac, 50/60 Hz,	Three	1 prefiltera	Any respirable particulate and
	1 PHS, 7A			gas/odor/VOC application
F116A2048	220 Vac, 50/60 Hz,	Two	1 prefiltera	Any respirable particulate and
	1 PHS, 7A			gas/odor/VOC application

aPrimary filters must be ordered separately. The choices include a 95% D.O.P. filter, 95% or 65% ASHRAE dust spot filter or two sorbent media modules (CPZ).

ORDERING INFORMATION

If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:

1.Your local Honeywell Commercial Air Products Distributor.

2.Air-Pure Systems

16873 Fish Point Rd. SE Prior Lake, MN 55372-1714 Phone: (800) 998-1919 Fax: (800) 221-3248

68-0200-2 Revised 10-07

F116 specifications

The Honeywell F116 is a cutting-edge avionics system designed for use in various aircraft platforms. This advanced flight control system leverages state-of-the-art technology to enhance situational awareness, improve safety, and optimize operational performance for pilots and crew.

One of the main features of the Honeywell F116 is its Integrated Electronic Flight Instrument System (EFIS). This system provides pilots with essential flight data in a clear and concise format, integrating various flight parameters such as altitude, speed, and heading. The EFIS displays this information on high-resolution color screens, allowing for easy readability and reducing pilot workload.

Another significant characteristic of the F116 is its advanced flight management system (FMS). The FMS is designed to streamline navigation and flight planning, using sophisticated algorithms to determine the most efficient flight paths. This capability not only enhances fuel efficiency but also ensures compliance with air traffic regulations, allowing for smoother operations in busy airspace.

The F116 is equipped with Honeywell’s advanced Automatic Dependent Surveillance-Broadcast (ADS-B) technology. This feature significantly improves situational awareness by allowing aircraft to automatically broadcast their position to air traffic controllers and other nearby aircraft. This real-time data sharing is crucial for collision avoidance and enhances overall air traffic safety.

The system also incorporates Honeywell’s SmartRunway technology, which provides pilots with real-time alerts regarding runway conditions, helping to prevent runway incursions and ensuring a safe landing environment. This feature is invaluable, especially in adverse weather conditions where visibility may be compromised.

Furthermore, the Honeywell F116 is designed with robust redundancy features. In critical systems like avionics, having backup components is essential to ensure reliability and safety during flight. The F116 architecture allows for seamless transitions between primary and backup systems, thus minimizing the risk of system failure.

In addition to its technological advancements, the Honeywell F116 is also user-friendly. The system is designed to facilitate easy upgrades, allowing operators to take advantage of technological advancements without extensive retrofitting. This flexibility is a significant advantage for both new aircraft and those seeking upgrades for existing platforms.

In summary, the Honeywell F116 represents a vital innovation in aviation technology. With its integrated avionics, advanced safety features, and commitment to enhancing pilot efficiency, it stands out as a leading solution for modern aviation needs. The continual development of such systems drives the aerospace industry toward greater safety, efficiency, and reliability.