Honeywell F118 specifications Parts List, Pre-filter, CPZ Adsorbent Module, See Fig

Page 9

 

F118 IN-CEILING MEDIA AIR CLEANER

 

 

 

Motor

NOTE: When tobacco smoke is a contaminant, both the par-

The motor is visible when the filter frame is removed. Inspect

ticle filter and the CPZ adsorbent filter must be ser-

viced at the same time.

the motor brackets for loose fasteners; tighten as necessary.

 

 

Pre-filter

The disposable pre-filter collects large dust particles and lint- type airborne fibers. It is wrapped around the particle filter and held in place with two clips. Check the filter every two weeks. To change the pre-filter:

1.Wrap a new pre-filter around the new particle filter.

2.Attach the two new clips to hold the pre-filter in place. (New clips are supplied with pre-filter replacements.)

3.Position the filter frame in the air cleaner.

4.Pull down the spring-loaded support rods together, posi- tion over the filters and secure in place.

CPZ™ Adsorbent Module

The CPZ™ adsorbent module is used to collect gases, vapors, odors and volatile organic compounds (VOC) from the air that passes through the air cleaner. The impurities are collected until the adsorbents reach saturation, when a continuously strong pungent odor is emitted. If the air cleaner is turned off for eight to ten hours, a temporary odor is emitted when it is turned back on. If the odor persists for 30 minutes, it is time to replace the filters.

The useful life of the CPZ™ sorbent modules can vary from four to 24 months, depending on the application. In most applications, the sorbent media life ranges from 12 to 18 months. Change modules and filters more frequently in facilities that operate 24 hours a day.

CAUTION

Eye Exposure.

Harmful dust can obstruct or injure unshielded eyes.

CPZ modules normally release dust when handled. Always wear safety glasses when installing or remov- ing CPZ modules.

1.Tilt the module up from the inside cabinet lip.

2.Use both hands to lower the CPZ module down and out from the end of the cabinet.

3.Place the used module in a plastic trash bag and dis- pose of properly.

4.Unwrap new CPZ™ sorbent modules and install.

IMPORTANT

Avoid excessive pressure on individual adsorbent panels.

NOTE: Upon initial startup, a small amount of dust can blow from the air cleaner. This is normal and stops a few minutes after startup.

PARTS LIST

See Fig. 10.

No.

Description

Pack Qty.

Order Number

1

CPZ™ sorbent module (2)—used only with DOP particle filters.

1

32002271

2

DOP primary particle filter, 95 percent (1).

1

32002272

3

 

 

 

Pre-filter (disposable) (1).

1

32002590

 

 

 

 

4

Blower wheel (1).

1

32002269

 

 

 

 

5

Motor assembly (1), 120V.

1

32002587

 

 

 

 

 

Motor assembly (1), 230V.

1

32004512

 

 

 

 

 

Motor mount.

1

32002589

 

 

 

 

6

Inlet cone (1).

1

32002286

 

 

 

 

7

Grille assembly, without hinges and latches (1).

1

32002266

 

 

 

 

8

3-speed switch.

1

00190382

 

 

 

 

9

Spring loaded plunger (2).

2

32002278

 

 

 

 

10

Motor maintenance grommet set (1)—(not illustrated).

3

32000261

 

 

 

 

11

Optional speed switch, variable (1)—(not illustrated).

1

32000234

 

 

 

 

( ) = Quantity required per unit.

9

68-0209-2 Revised 11-07

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contents Features ApplicationOrdering Information SpecificationsChoose Location Planning the InstallationWhen Installing This Product InstallationUnpack Air Cleaner Make Opening If Mounting in Drop CeilingMounting procedure Mount Air Cleaner CabinetElectrical Hookup Install FiltersInstalling CPZ Modules Install GrilleOperation ServiceParticle Filter Opening/Closing GrillePre-filter Parts ListCPZ Adsorbent Module See FigF118 Air Cleaner components F118 IN-CEILING Media AIR Cleaner How to make a warranty claim or have questions answered Limited TWO-YEAR Warranty
Related manuals
Manual 2 pages 26.32 Kb

F118 specifications

The Honeywell F118 is an advanced multi-role tactical aircraft primarily designed for various military applications. With a strong emphasis on flexibility and adaptability, the F118 leverages cutting-edge technologies to meet the demands of modern warfare. Built to operate in a wide range of environments, it features a sleek aerodynamic profile that enhances performance and fuel efficiency.

One of the standout features of the F118 is its engine performance. The aircraft is equipped with state-of-the-art turbofan engines that provide exceptional thrust and reliability. This power allows for rapid acceleration and impressive climb rates, enabling quick responses to evolving battlefield situations. Its range is further extended by efficient fuel consumption, making it ideal for long-duration missions.

The F118 also incorporates advanced avionics that enhance situational awareness for pilots. The highly integrated cockpit features multi-functional displays, synthetic vision systems, and an advanced heads-up display (HUD). These technologies provide real-time information, improving decision-making capabilities during missions. The aircraft is equipped with cutting-edge radar systems that enable it to detect and engage multiple targets simultaneously, ensuring superiority in both air-to-air and air-to-ground combat scenarios.

Another significant aspect of the Honeywell F118 is its survivability features. The aircraft employs an array of passive and active countermeasures to protect against threats. Its low observable technology minimizes radar cross-section, making it harder to detect. Additionally, advanced onboard systems allow it to detect incoming missiles and provide options for evasion or counteraction.

The F118 is also designed for versatility in terms of mission roles. It can be configured for air superiority, reconnaissance, close air support, and electronic warfare. This adaptability makes it a valuable asset to any modern air force. The aircraft can carry a wide variety of munitions, including precision-guided bombs and air-to-air missiles, tailored to the specific needs of the operation.

In conclusion, the Honeywell F118 represents a blend of advanced technology, operational flexibility, and superior performance. Its combination of powerful engines, sophisticated avionics, and survivability features positions it as a formidable player in the tactical aircraft domain. Whether in offensive or defensive roles, the F118 is engineered to excel in the complexities of modern warfare, ensuring mission success in diverse operational environments.
Top Page Image Contents