New | State Industries SDV80-140, SDV100-199 instruction

NEW!

SDV100-400

Non-Condensing

Up To 85%

Thermal

Efﬁciency

Commercial Gas Water Heater

Exhaust pipe power-vents products of combustion to outside building.

Air intake pipe draws all combustion make-up air from outside building.

The Sandblaster® Force™ delivers the money-saving performance of State Industries original Sandblaster commercial water heater, plus a solution to negative air pressure, a problem found in many commercial applications.

For example, in restaurant kitchens, commercial range hoods and exhaust fans draw large amounts of air out of the room. This creates negative air pressure in the room, which can deprive an ordinary commercial gas water heater of sufﬁcient make-up air required for safe, efﬁcient, proper operation.

In negative air pressure situations, downdrafts can occur inside an ordinary water heater, compressing the burner ﬂame, resulting in impaired water heating performance and recovery efﬁciency. Negative air pressure can also generate Carbon Monoxide buildup, and other potential safety hazards.

Sandblaster® Force™ is the solution, because it doesn’t share the inside air! It is equipped with a factory-installed blower and two-pipe system for intake of make-up air and separate exhaust venting. This unique air delivery system (patent pending) insures that Sandblaster® Force™ is immune to negative air pressure. Sandblaster® Force™ also helps reduce space heating or air conditioning costs, because it does not consume heated or cooled air from inside the building.

Long Vent Runs Mean Installation Flexibility

The Force™ installs just about anywhere, thanks to intake and exhaust vent runs of up to 135 feet horizontally or vertically on models SDV80-140, SDV100-199 and SDV100-260. The SDV75-70 vent run is 50 feet horizontally or vertically. The SDV100-400 has a maximum vent run of 110 feet using 6 inch pipe. (Note: The ﬁrst 10 feet of exhaust run for the SDV100-400 must be CPVC Schedule 40 pipe minimum.) See the vent run chart or the owners manual for speciﬁc venting information.

■3-Year or 5-Year Tank Warranty.

■ASME Construction available on SDV100 260 and SDV100-400.

■Turbo-Force Ring Self-Cleaning Feature – Patented design automatically reduces harmful sediment buildup inside the tank. Sandblaster® Force™ stays energy-efﬁcient, so it saves money throughout its life. Turbo-Force dip tube in model SDV75 70.

■Labor Replacement Allowance (LRA) for installing contractor if heater needs replacement during basic 3-year warranty: $250 LRA on 75-70 model; $500 LRA on 80-140 and 100-199 models; $1000 LRA on 100-260 and 100-400 models.

■Non-Condensing Design helps prevent corrosion. No condensate pump or drain needed.

■Installs with 3˝, 4˝ or 6˝ ** Schedule 40 PVC pipe, depending on the model and vent run.

■Two 45° 3˝ or 4˝ (depending on model) Schedule 40 Elbows, with screen, supplied for use as vent caps. Schedule 80 Elbows on 100-400.

■Integral Automatic Blower – With 110/120 Volt electrical system. Maximum electrical draw: 2 Amps on SDV75 70, 12 AMPS on all other models.

*Check owners manual and local codes for speciﬁc venting requirements. Each 90° elbow reduces maximum run by 5 feet.

**Exhaust vent run on SDV100-400 must be CPVC Schedule 40 minimum for the ﬁrst 10 feet of the run.

■Intermittent electronic ignition.

■Reinforced tank design for longer life – The Sandblaster® Force™ glasslined tank is reinforced with extra steel in all the most critical areas, to insure long tank life.

■Removable lanced-port steel burner, with multiple tubular construction, for even heat distribution, maximum efﬁciency, quiet operation. SDV75 70 has a formed aluminized steel burner.

■Foam insulation – Reduces heat loss over 21⁄2 times more effectively than standard ﬁberglass.

■Factory-installed Temperature & Pressure safety valve (T&P Valve).

■Factory-installed Energy Cut-Off (“ECO”) safety switch.

■Multiple Magnesium Anode Rods – for extra protection against electrolytic tank corrosion. SDV75 70 has a single large diameter magnesium anode.

■Tank Inspection Port for easy access to tank interior on all models except SDV75 70.

■Maximum Hydrostatic Working Pressure: 150 psi. (ASME 160 psi.)

		The
		Expert’s
		Expert’s
WATER HEATERS 500 Lindahl Parkway, Ashland City,TN 37015		Choice™

SDV80-140, SDV100-199, SDV100-260 specifications

State Industries has been a leader in the water heater industry for years, and among their distinctive product lineup are the SDV100-199, SDV100-260, and SDV80-140 models, designed to meet diverse residential and commercial needs. These models are particularly appreciated for their efficient performance, reliability, and innovative technologies.

The SDV100-199 model is designed to deliver a powerful performance for residential applications. It features a high recovery rate, making it ideal for households with increased hot water demands. This model is equipped with a state-of-the-art digital control system, which allows for precise management of water temperatures and enhances energy efficiency. The SDV100-199 also comes with a durable tank insulated with high-density foam, reducing heat loss and improving overall efficiency.

On the other hand, the SDV100-260 model caters to larger families or commercial settings that need higher volumes of hot water. With a robust 260-gallon capacity, this model stands out for its exceptional recovery rates, ensuring an uninterrupted supply of hot water. The construction utilizes high-quality materials, ensuring longevity and resistance to corrosion. Furthermore, this model incorporates advanced features such as an energy-efficient burner design that maximizes thermal output while minimizing fuel consumption.

Lastly, the SDV80-140 model is a versatile option that strikes a balance between capacity and efficiency. With an 80-gallon tank size, it's suitable for smaller businesses or medium-sized homes. It employs efficient insulation and a reliable burner system, ensuring quick heating times and reduced operating costs. The model also features a simple control interface, making it user-friendly for a wide range of consumers.

All three models utilize innovative technologies that enhance their performance and efficiency. With dual-fuel capabilities, they can run on either natural gas or propane, providing flexibility based on availability and cost. Additionally, these units are designed with user-friendly maintenance features, facilitating easier service and longevity.

In conclusion, State Industries’ SDV series consistently demonstrates high-efficiency heating solutions for both residential and commercial applications, combining innovative features with reliable performance. Whether it’s the SDV100-199, SDV100-260, or SDV80-140, users can expect durability, efficiency, and exceptional hot water delivery, making these models a worthwhile investment for any setup.